0
0

Area 419 ZERO S-Series .308 Winchester Full-Length Sizing Die

UPC: 810080183155

$275.00

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Area 419 ZERO S-Series .308 Winchester Sizing Die takes the hard-earned lessons from Area 419's premium M-Series and distills them into a traditional 7/8"-14 threaded die that fits standard presses. For handloaders chasing tight, repeatable brass without the price of a full micrometer die, this is the sweet spot. It resizes .308 Winchester and 7.62 NATO cases full-length, from the neck all the way down to the extractor groove, so your brass cycles clean and chambers smooth every time.

What Sets the ZERO S-Series .308 Die Apart

The body is reamer cut to exacting dimensions for a true size, which is Area 419's answer to the dreaded sticky bolt that shows up after a couple of firings. Instead of relying on a loose spec, the chamber is machined tight and consistent. There's also a hydraulic shoulder pressure relief system built in, which helps reduce stress on the case shoulder and stretches out the usable life of your brass. These are the kinds of details that precision reloaders notice over a few hundred rounds.

Neck Tension and Decapping on the .308 Sizing Die

Every die ships with a precision ground .002" neck tension expander mandrel, so you're set up for solid, consistent bullet grip right out of the box. If you want to fine-tune tension further, Area 419's separate Mandrel Kit adds more increments. The spring-loaded decapping system kicks spent primers out cleanly, and the steel decap pins are replaceable when the day comes. Reloaders who normally run mandrel work as a separate step have found the built-in mandrel delivers the same results in one pass.

Press and Shellholder Compatibility

This is a die-only product and does not include a shellholder. It works with common shellholders from Redding, Hornady, RCBS and others, and it also plays nicely with Area 419's ZERO Modular Shellholder System if you run their setup. Machined in stainless steel and made entirely in America, it's built to earn a permanent spot on your bench.

Key Specifications

  • Manufacturer: Area 419
  • Manufacturer Part Number: 419-ZERODIE-S30
  • UPC: 810080183155
  • Cartridge: .308 Winchester / 7.62 NATO
  • Die Type: Full-Length Sizing Die
  • Die Body: Standard 7/8"-14 Thread
  • Material: Stainless Steel
  • Neck Tension Mandrel: .002" included
  • Decapping: Spring-loaded, replaceable steel pin
  • Shoulder Relief: Hydraulic shoulder pressure relief
  • Country of Origin: Made in USA

What’s Included

  • ZERO S-Series .308 Winchester sizing die
  • Area 419 ZERO Universal Die Ring
  • .002" neck tension expander mandrel (installed)
  • Spare decapping pin
  • Install/removal tools

Frequently Asked Questions

Does the Area 419 ZERO S-Series .308 die come with a shellholder?

No, this is a die-only product and does not include a shellholder. It is compatible with common shellholders from Redding, Hornady, RCBS and similar brands. It also works with Area 419's ZERO Modular Shellholder System if you run their setup.

Will the ZERO S-Series .308 Winchester die fit my standard press?

Yes. Area 419 built the S-Series around a traditional 7/8"-14 die body specifically so it drops into standard presses, unlike their larger M-Series. That was a big part of the design goal, making these industry-leading features accessible to reloaders on common equipment.

Do I still need a separate mandrel step with this die?

Not necessarily. The die ships with a .002" precision ground expander mandrel built in, which sets neck tension during the sizing stroke. Reloaders who normally mandrel as a separate step report getting the same consistent neck tension in one pass, though you can add more tension increments with the separate Area 419 Mandrel Kit.

What's the difference between the S-Series and the M-Series .308 die?

The S-Series brings over the core features of the M-Series, like reamer-cut true sizing, the built-in mandrel, spring-loaded decapping, and hydraulic shoulder relief, in a standard 7/8" die body at a lower price. The main thing it leaves out is the M-Series micrometer-adjustable headspace and modular body. For most reloaders, the S-Series covers the features that matter most on the bench.

Additional information

UPC

810080183155

Manufacturer

Manufacturer Part Number

419-ZERODIE-S30

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO S-Series .308 Winchester Full-Length Sizing Die”