0
0

Area 419 ZERO S-Series 6.5 Creedmoor Full-Length Sizing Die

UPC: 810080183148

$275.00

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been eyeing the Area 419 M-Series but wanted something that drops right into a conventional press, the ZERO S-Series is built for exactly that. Area 419 took the features that made the M-Series a hit and packed them into a traditional 7/8-14 die body, so you can run it in your Zero press or standard ram-style setups without special hardware. This one is cut for 6.5 Creedmoor and does full-length sizing from the neck all the way to the extractor groove, bringing fired brass back to true spec.

What Sets the ZERO S-Series Sizing Die Apart

The die is reamer cut to exacting dimensions, which is a big part of why it sizes brass down to a genuine spec rather than just getting it close. That translates to smooth chambering and no sticky bolt after a couple of firings. It ships with a precision-ground full-length expander mandrel set for .002 neck tension, and if you want to fine-tune, the Area 419 6.5mm Mandrel Kit drops in increments between .0005 and .0025. Spring ejection kicks spent primers out cleanly, and the hydraulic shoulder pressure relief keeps case shoulders from deforming during the stroke.

Build Quality on the 6.5 Creedmoor S-Series Die

Area 419 machines this die from 17-4 stainless steel and finishes it with a nitride coating, so it holds up to heavy use and keeps running smooth. The decap pins are replaceable steel, so wear-and-tear parts are an easy swap down the road instead of a reason to replace the whole die. It's 100 percent made in America, which is right in line with what folks expect from the Area 419 lineup.

Press and Shellholder Compatibility

Keep in mind this is a die-only product and does not include a shellholder. The good news is it plays nice with common shellholders from Redding, Hornady, RCBS and the like, plus it works with the Area 419 ZERO Modular Shellholder System if you want finer headspace control. Reloaders running precision 6.5 Creedmoor have been happy with the results, reporting near-zero runout and consistent neck tension across full batches of brass.

Key Specifications

  • Manufacturer: Area 419
  • Cartridge: 6.5 Creedmoor
  • Die Style: Full-Length Sizing Die
  • Thread: 7/8-14
  • Material: 17-4 Stainless Steel
  • Finish: Nitride Coated
  • Included Mandrel: .002 Neck Tension
  • Decap System: Spring Ejection, Replaceable Steel Pins
  • Shoulder Relief: Hydraulic Pressure Relief
  • Country of Origin: United States
  • Manufacturer Part Number: 419-ZERODIE-S65CR
  • UPC: 810080183148

What’s Included

  • Area 419 ZERO S-Series 6.5 Creedmoor sizing die
  • Area 419 ZERO Universal Die Ring
  • .002 neck tension expander mandrel
  • Spare decapping pin
  • Install and removal tools

Frequently Asked Questions

Does the ZERO S-Series 6.5 Creedmoor die come with a shellholder?

No, this is a die-only product and does not include a shellholder. It works with common shellholders from Redding, Hornady, RCBS and similar brands. It's also compatible with the Area 419 ZERO Modular Shellholder System if you want finer headspace control.

What's the difference between the S-Series and the M-Series sizing die?

The S-Series takes the core features of the M-Series and puts them into a traditional 7/8-14 die body that fits standard presses. The main difference is the S-Series skips the micrometer headspace adjustment found on the M-Series, using a standard setup method instead. Both share the reamer-cut dimensions, full-length mandrel system, and spring decapping.

Can I adjust neck tension on the Area 419 S-Series die?

Yes. The die ships with a precision-ground expander mandrel set for .002 neck tension right out of the box. Add the Area 419 6.5mm Mandrel Kit and you can fine-tune in increments from .0005 to .0025 to find what shoots best in your rifle.

Will the S-Series die fit a standard press like a Rock Chucker or Co-Ax?

Yes, the current production S-Series uses a standard 7/8-14 thread and fits conventional ram-style presses along with the Area 419 Zero press. Early first-run dies had shorter threading, but that was corrected on the standard production models. This one is the standard non-blem version.

Additional information

UPC

810080183148

Manufacturer

Manufacturer Part Number

419-ZERODIE-S65CR

Reviews

There are no reviews yet.

Be the first to review “Area 419 ZERO S-Series 6.5 Creedmoor Full-Length Sizing Die”