$500.00
2 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
The Area 419 Zero M-Series Sizing Die for .308 Win takes what used to be three or four separate reloading steps and folds them into one clean operation. Area 419 reamer-cuts the sizing chamber to true dimensions, so your brass gets fully sized from the neck all the way down to the extractor groove. That means no more sticky bolt lift after the second or third firing, which is the kind of detail that separates a good handloading setup from a frustrating one.
The headline feature is the micrometer-adjustable shoulder bump. Instead of loosening a lock ring and guessing your way back to a setting, you dial headspace in with a clearly indexed micrometer and come back to it exactly every time. Pair that with the precision-ground expander mandrel that sizes the inside of the neck on the downstroke, and you get consistent neck tension without pulling an old-school expander ball back through the mouth. Every die ships with a .002 neck tension mandrel, and you can add other increments through the Area 419 Mandrel Kit if you want to fine-tune.
This is a 1-1/4 inch die, so it needs a Hybrid or 1-1/4 inch turret on your ZERO or other press. It will not work with a 7/8 inch turret or a 7/8 inch press, and it is not compatible with standard shell holders because the rim diameter is larger. This particular package solves that for you by including the matching ZERO M-Series shell holder.
Round out the design with spring ejection for spent primers, replaceable steel decap pins, and hydraulic shoulder pressure relief that keeps brass from getting overworked. It's machined and built in America, and reloaders running .308 consistently report near-zero runout and reloads that come out right the first time. If you're chasing match-grade .308 ammo without a benchtop full of single-purpose tools, this is a serious one-die answer.
Yes. This M30SH package includes the matching ZERO M-Series shell holder, which you need to run the die. These dies are not compatible with standard shell holders because they require a larger diameter shell holder rim.
This is a 1-1/4 inch die, so it requires a Hybrid or 1-1/4 inch turret on your ZERO or other press. It cannot be used with a 7/8 inch turret or a standard 7/8 inch press. If you're set up for 7/8 inch dies, you'll need the right turret before this will work.
The micrometer-style headspace adjustment gives you a clearly indexed way to set your shoulder bump and return to it exactly. Rather than loosening a lock ring and repositioning the die body by feel, you dial in the setting you want. It's repeatable, which is a big part of why reloaders get consistent results with it.
Yes. The die ships with a .002 neck tension expander mandrel, and you can add other increments through the Area 419 Mandrel Kit. The precision-ground mandrel sizes the inside of the neck for consistent tension without needing a separate mandrel step.
| UPC | 810080181649 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 419-ZeroDie-M30SH |
| Shipping Weight | 3.32 |
You must be logged in to post a review.
Reviews
There are no reviews yet.