Description
The Forster Bushing Bump Neck Sizing Die Kit is built for the .223 Remington handloader who cares about tight groups and long case life. Instead of overworking the entire case the way a standard full-length die does, this die sizes just the neck while gently bumping the shoulder back. That means the body of your brass keeps its fire-formed fit to your chamber, which pays off in concentricity and consistency down range. The whole operation happens in one step, keeping your case necks running straight.
What the 223 Bushing Bump Neck Die Brings to the Bench
The real magic here is the interchangeable bushing system. Forster offers bushings in .001 inch increments, so you can dial in exactly how much neck tension you want for your bullet seating. This kit ships with three bushings pre-selected by Forster staff, measuring .247, .245, and .243 inches, covering the sizes most .223 reloaders reach for. A good rule of thumb is to pick a bushing roughly .002 inch smaller than your loaded round measures at the neck. Every bushing gets machined to a smooth interior finish for clean, even sizing.
Why Precision Reloaders Reach for the Forster Bump Neck Die
Controlling neck tension and limiting how much the brass gets worked are two of the biggest levers you have for accuracy and brass longevity. Reloaders who run this die consistently report tighter groups and brass that lasts noticeably longer between trimmings and annealing. The die itself is hand polished and made in the USA, and it uses standard 7/8-14 threads so it drops right into a standard press. If you run a Forster Co-Ax press, you won't need a shellholder at all.
This is a tool for folks chasing the best their .223 rifle can give them, whether that's long range, varmint work, or benchrest competition. Keep in mind the die accepts Forster bushings only, so stock up accordingly when you want to fine-tune your setup.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): BBK2141
- UPC: 757253999109
- Caliber: .223 Remington
- Die Type: Bushing Bump Neck Sizing Die
- Bushings Included: Three (.247, .245, .243)
- Bushing Increments: .001 inch
- Thread Size: 7/8-14
- Gun Type: Rifle
- Country of Origin: USA
- Shipping Weight: 0.595 lb
What’s Included
- One Forster Bushing Bump Neck Sizing Die (hand polished)
- Three neck sizing bushings pre-selected by Forster staff (.247, .245, .243)
- Decapping assembly for depriming
- Storage box
- Complete instructions
Frequently Asked Questions
What bushings come with the 223 Bushing Bump Neck Die Kit?
This kit includes three neck sizing bushings pre-selected by the Forster staff, measuring .247, .245, and .243 inches. Those three cover the sizes most .223 Remington reloaders need for proper neck tension. If you need a different size, Forster offers bushings in .001 inch increments, and they are sold separately.
Does this die work for 5.56 NATO as well as .223 Remington?
The die is made for the .223 Remington case, which shares external case dimensions with 5.56 NATO brass, so many reloaders use it with both. Since this is a neck bump die rather than a full-length die, you are sizing the neck and bumping the shoulder on already fire-formed brass. For new or heavily worked brass, you may still want a full-length sizing die in your rotation.
How do I pick the right bushing size?
A reliable starting point is to measure your loaded round at the case neck, then choose a bushing roughly .002 inch smaller than that measurement. This gives you proper neck tension on the bullet. From there you can fine-tune up or down in .001 inch steps to get the exact tension your load likes.
Will this die fit a standard reloading press?
Yes. The die uses standard 7/8-14 threads, so it threads into any standard single stage or turret press. If you happen to run a Forster Co-Ax press, you won't even need a shellholder since that press doesn't use one.



Reviews
There are no reviews yet.