0
0

Forster Headspace Gage 6.5 Creedmoor No-Go (Steel) HG65CRN

UPC: 757253992148

$31.99

25 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Headspace is one of those behind-the-scenes measurements that most people never think about until something goes wrong. It's the distance between the breech face and the datum on the cartridge when the action is closed, and getting it right matters for both safety and the kind of groups a 6.5 Creedmoor is capable of. The Forster No-Go gage gives you a precise reference point to check whether a chamber has stretched past where it should be. Drop it in, and the bolt should not close. If it does, that's your signal the chamber may have excessive headspace and needs a closer look.

What the Forster 6.5 Creedmoor No-Go Gage Tells You

Forster builds these gages from hardened steel and machines them to very tight tolerances, which is why gunsmiths and serious handloaders reach for them. The No-Go dimension for this model sits at 1.5450" maximum. Most gunsmiths set a rifle's headspace somewhere between the Go and No-Go dimensions, so this gage is the upper bookend of that safe window. Keep in mind the No-Go is Forster's recommended maximum for chambering new bolt action rifles, not the absolute SAAMI field maximum, so a bolt closing on it isn't automatically dangerous, it's a flag to investigate further.

Pairing the No-Go With a Go Gage

This gage checks the long side of the equation. For a complete picture, a lot of folks run it alongside the matching Go gage so they can confirm both ends of the tolerance range. That combination is what you want when you're finish chambering a barrel, screwing on a prefit, or inspecting a used rifle before you trust it with your reloads. Reloaders especially like having one on the bench, since knowing your chamber dimensions helps you set up dies and brass for consistent results.

Built for the 6.5 and 6 Creedmoor Chamber

One handy detail: this gage works for checking both the 6.5 Creedmoor and the 6mm Creedmoor, since they share the same headspace geometry. The caliber and gauge type are marked right on the body, so there's no second-guessing which one you've grabbed when you've got a few in the drawer. It's a simple, durable tool that earns its spot on any bench where accuracy and peace of mind matter.

Key Specifications

  • Caliber: 6.5 Creedmoor (also checks 6mm Creedmoor)
  • Gauge Type: No-Go
  • Case Type: Rimless
  • No-Go Chamber Dimension: 1.5450" max
  • Material: Hardened Steel
  • Overall Length: 1.541"
  • Color: Steel
  • Manufacturer: Forster Products
  • Manufacturer Part Number: HG65CRN
  • UPC: 757253992148
  • Country of Origin: USA
  • Quantity: 1

What’s Included

  • One Forster 6.5 Creedmoor No-Go headspace gage (HG65CRN)

Frequently Asked Questions

How do I use the Forster 6.5 Creedmoor No-Go gage?

With the firearm unloaded and the extractor and ejector removed or accounted for, place the gage in the chamber and gently attempt to close the bolt or action. The bolt should not fully close on the No-Go gage. If it does close easily, the chamber may have excessive headspace and should be checked by a qualified gunsmith before firing.

Does the No-Go gage work for 6mm Creedmoor too?

Yes. The 6.5 Creedmoor and 6mm Creedmoor share the same headspace dimensions, so this gage can be used to check either chamber. The caliber and gauge type are marked on the body for quick reference.

Do I need the Go gage as well as the No-Go?

For a full check you'll want both. The Go gage confirms the chamber meets the minimum dimension so it will accept standard ammunition, while the No-Go confirms it hasn't stretched past the safe maximum. Running the pair together is the standard way gunsmiths and reloaders verify a chamber falls inside the correct window.

Is a bolt closing on the No-Go gage automatically dangerous?

Not necessarily. Forster's No-Go is set at the recommended maximum for chambering new bolt action rifles, which is tighter than the SAAMI field maximum. A bolt that closes on it is a sign to investigate further with a field gage or a gunsmith rather than an immediate cause for alarm.

Additional information

UPC

757253992148

Manufacturer

Manufacturer Part Number

HG65CRN

Color

Steel

Length

1.541''

Quantity

1

Shipping Weight

0.095

Style

No Go Gauge

Reviews

There are no reviews yet.

Be the first to review “Forster Headspace Gage 6.5 Creedmoor No-Go (Steel) HG65CRN”