0
0

Forster 6.5 Creedmoor Bench Rest Die Set – Full Length Sizer & Seater

UPC: 757253992063

$115.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster built its reputation on dies that do one thing better than almost anyone: produce straight, concentric ammo round after round. This 6.5 Creedmoor Bench Rest set pairs a Full Length Sizing Die with Forster's standard Bench Rest Seater Die, and both are machined by hand with one-piece reamers to hold tight tolerances across every working surface. If you load 6.5 Creedmoor for a precision bolt gun and care about runout, this is the kind of set that shows up on a lot of reloading benches for good reason.

What the Forster Full Length Sizing Die Does

The sizer handles the full job in one pass. It sizes the case neck, shoulder, and body, sets headspace by bumping the shoulder, deprimes, and expands the case neck so your sized brass drops right back into a SAAMI-spec chamber. The standout here is the elevated E-Z Out expander ball. Forster raises the expander up near the die neck, which gives better mechanical leverage on the expansion stroke and uses a self-centering washer system to keep the neck from being pulled off-center as the case comes back down. That translates to straighter necks and more uniform tension on the bullet.

Why the Forster Bench Rest Seater Die Seats So Straight

Forster made the first straight-line seater die of its kind, and the design still holds up. Instead of only grabbing the case rim, the caliber-specific sliding chamber captures the entire case, the bullet, and the seating stem on a common axis before the bullet ever starts into the neck. Everything stays aligned through the full seating stroke, which is where that reputation for low runout comes from. It's a non-crimping die, so you get clean, consistent seating depth without deforming the case mouth or the bullet.

Both dies use Forster's cross-bolt locking ring, so you clamp the split ring rather than driving a set screw into the die threads. The set ships in Forster's Deluxe Die Box and works in any standard reloading press. If you run a Forster Co-Ax press, you won't even need a shellholder.

Key Specifications

  • Cartridge: 6.5mm Creedmoor
  • Set Type: Bench Rest 2-Die Set
  • Dies Included: Full Length Sizing Die and Bench Rest Seater Die
  • Seater Style: Standard non-crimping straight-line Bench Rest Seater
  • Sizer Features: Sizes neck, shoulder and body, deprimes, expands neck, bumps shoulder for headspace
  • Expander: Elevated E-Z Out expander ball with self-centering washer
  • Construction: Hand-machined, hardened and heat-treated steel
  • Locking Ring: Forster Cross Bolt Die Locking Ring
  • Press Compatibility: Fits standard reloading presses; no shellholder needed in Forster Co-Ax press
  • Packaging: Deluxe Die Box
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 004253
  • UPC: 757253992063
  • Shipping Weight: 1.54 lbs

What’s Included

  • Forster Bench Rest Full Length Sizing Die (6.5mm Creedmoor)
  • Forster Bench Rest Seater Die (6.5mm Creedmoor)
  • Deluxe Die Box

Frequently Asked Questions

Does the Forster 6.5 Creedmoor Bench Rest set come with a micrometer seater?

No. This set uses Forster's standard Bench Rest Seater Die, not the Ultra Micrometer version. It still delivers the same straight-line, co-axial seating that Forster is known for; you simply dial depth with the threaded stem instead of a micrometer top. If you want repeatable numbered settings for switching between loads, Forster sells the Ultra Micrometer seater separately.

Will these dies work in a standard reloading press or do I need a Forster press?

They work in any standard reloading press that accepts common 7/8-14 threaded dies. You will need the correct shellholder for 6.5 Creedmoor if you run a non-Forster press. Only the Forster Co-Ax press lets you skip the shellholder entirely.

What does the full length sizing die actually do to the brass?

It sizes the case neck, shoulder, and body in one stroke, deprimes the case, and expands the neck on the way out. It also bumps the shoulder to set your headspace so fired brass returns to SAAMI minimum dimensions. That full length work is why a lot of folks start their 6.5 Creedmoor die collection with this style of sizer.

What makes the Forster seater die produce such low runout?

The caliber-specific sliding chamber captures the entire case along with the bullet and seating stem on one axis before seating begins. Because everything is held in alignment through the full stroke rather than just the case rim, the bullet goes in straight. That design is a big part of why these dies have a strong reputation for concentric, consistent ammo.

Additional information

UPC

757253992063

Manufacturer

Manufacturer Part Number

004253

Shipping Weight

1.54

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5 Creedmoor Bench Rest Die Set – Full Length Sizer & Seater”