Description
Precision handloaders know that consistent neck tension is one of the biggest levers for shrinking group sizes, and the Forster Bushing Bump Kit for 6.5 Creedmoor gives you real control over it. Instead of hammering the whole case down like a standard full-length die, this setup sizes the neck only as much as you need while bumping the shoulder back just enough for smooth chambering. Your brass keeps its fire-formed body dimensions, which means less overworking, longer case life, and straighter necks round after round.
What the Forster Bushing Bump Die Does Differently
The die handles three jobs in a single stroke. It sizes the neck based on whichever bushing you drop in, bumps the shoulder back to set your headspace, and deprimes the case along the way. The kit ships with three bushings measuring .292, .290, and .288 inches, all hand-selected by Forster to cover the range most 6.5 Creedmoor reloaders need right out of the box. Bushings are machined to a smooth, polished interior that Forster describes as "smooth as silk," so brass slides through cleanly without galling the necks.
Tuning Neck Tension With the 6.5 Creedmoor Kit
The whole point of a bushing die is choice. Each bushing changes how far down your neck gets squeezed, which directly sets your bullet grip. A good starting rule is to pick a bushing roughly .002 inch smaller than a loaded round measures at the neck. If you neck-turn your brass to a uniform wall thickness, you can pull the expander ball and size from the outside only. Running mixed or un-turned brass? Leave the expander in and choose a bushing large enough that every case ends up smaller than bullet diameter, so nothing gets overworked. Extra bushings are available separately in .001 inch increments if you want to fine-tune even further.
Machined and finished in the USA, this die is a natural partner to a Forster seating die if you are building a dedicated precision load for the 6.5 Creedmoor. It drops right into a standard press, and Co-Ax users won't need a shellholder at all.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number (MPN): BBK2271
- UPC: 757253991905
- Caliber: 6.5 Creedmoor
- Die Type: Bushing Bump Neck Sizing Die
- Included Bushing Sizes: .292, .290, .288 inch
- Bushing Increments Available: .001 inch (sold separately)
- Decapping: Yes, deprimes during sizing
- Expander Ball: Removable for outside-only neck sizing
- Country of Origin: USA
- Shipping Weight: 0.63 lb
What’s Included
- One Forster Bushing Bump Neck Sizing Die (6.5 Creedmoor)
- Three neck sizing bushings (.292, .290, .288)
- Decapping assembly
- Instructions
Frequently Asked Questions
What bushing sizes come with the Forster Bushing Bump Kit for 6.5 Creedmoor?
The kit includes three bushings measuring .292, .290, and .288 inches, pre-selected by Forster to cover the range most 6.5 Creedmoor handloaders need. Each one gives you a different amount of neck tension depending on your brass and the bullet grip you want. If you need something outside that range, Forster offers additional bushings separately in .001 inch increments.
Does this die bump the shoulder and deprime at the same time?
Yes. In a single stroke the die sizes the neck to your chosen bushing, bumps the shoulder back to set headspace for smooth chambering, and deprimes the case. That one-step operation is what helps keep necks straighter and cuts down on the amount of handling your brass sees.
How do I pick the right bushing for my neck tension?
A solid starting point is to measure a loaded round at the case neck and choose a bushing roughly .002 inch smaller. If you neck-turn your brass to a uniform wall thickness, you can remove the expander ball and size from the outside only. For brass that isn't turned, leave the expander in and pick a bushing large enough that all cases end up smaller than bullet diameter so nothing gets overworked.
Does this die full-length size the case body?
No. This is a neck sizing die with shoulder bump, so it leaves the case body at its fire-formed dimensions for that glove fit to your chamber. That approach prolongs case life and improves concentricity compared to full-length sizing every reload.




Reviews
There are no reviews yet.