Description
If you run a Forster Co-Ax press, you already know the jaw setup is what makes it float cases so precisely. The Quick Change Jaws in S-Large configuration take that a step further by letting you change over to a new case size without fighting springs or small parts. These jaws hold rims from .468" to .562", which covers a big chunk of the common bottleneck and straight-wall cartridges reloaders work with every day.
How the S-Large Quick Change Jaws Work
While a case sits in the lower shell holder jaws, it's supported by spring-loaded jaws that contact the base of the cannelure for more positive extraction. They're self-acting too, so when you place a cartridge in the die and cycle the handle, the jaws open and close right on the case head. When the handle comes back up, they automatically open and release the case, which keeps your rhythm smooth round after round.
Changing Calibers with the Quick Change Jaw Assembly
This is where the quick change design earns its keep. Instead of taking apart the shell holder jaws, you just remove the 10-24 button head screws and drop in the jaws for your next case and die. That saves real time when you're swapping calibers that require flipping the jaws 180 degrees or moving between the S and LS families. The design also keeps things foolproof, so you don't have to worry about losing a spring, misplacing a spare set, or putting a wear plate on backwards.
What the S-Large Set Covers
The S-Large jaws handle an impressive list of cartridges, including 243 Winchester, 25-06 Remington, 270 Winchester, 280 Remington, 7mm Remington Magnum, 308 Winchester, 30-06 Springfield, 30-30 Winchester, 300 Win Mag, 45 ACP, and plenty more in the .468" to .562" rim range. If you load across several of those on one bench, keeping a dedicated S-Large set ready means less downtime and more time pulling the handle.
Key Specifications
- Configuration: S-Large
- Rim Range Held: .468" to .562"
- Compatibility: Forster Co-Ax Reloading Press
- Jaw Action: Spring-loaded, self-acting
- Mounting Hardware: 10-24 x 5/8" button head screws
- Manufacturer: Forster Products
- Manufacturer Part Number: 028271-201
- UPC: 757253991417
- Shipping Weight: 0.275 lb
- Country of Origin: United States
What’s Included
- Forster S-Large Quick Change Jaw Assembly (holds .468"-.562" rim)
Frequently Asked Questions
What does the S-Large configuration on these Forster Quick Change Jaws hold?
The S-Large jaws hold case rims from .468" to .562". That range covers a wide spread of popular rifle and handgun cartridges, from 243 Winchester and 308 Winchester up through 30-06 Springfield, 300 Win Mag, and 45 ACP. If your case rim falls in that window, this is the set you want.
Will these jaws fit my Forster Co-Ax press?
Yes, the Quick Change Jaws are designed specifically for the Forster Co-Ax reloading press. They replace or supplement the shell holder jaws using the standard 10-24 button head screws, so installation is straightforward.
How are the Quick Change Jaws different from the standard shell holder jaws?
The quick change design lets you swap case sizes without disassembling the jaws or dealing with loose springs. You simply remove the button head screws and drop in the new jaws, which also prevents mistakes like flipping a jaw or installing a wear plate backwards. It's a real time-saver if you change calibers often.
Do I need a different jaw set for cartridges like 45-70?
Yes. The 45-70 Government and other very large-rim cases fall into the LS-Large range of .531" to .625" rather than S-Large. For those, you'd want the LS-Large jaw assembly. The S-Large set shown here is built for the .468" to .562" rim window.




Reviews
There are no reviews yet.