0
0

Forster Quick Change Jaws LS-Large (.531-.625) for Co-Ax Press

UPC: 757253991394

$51.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you run a Forster Co-Ax press, you already know the shell holder jaw setup is one of its best features and also one of the few things that can slow you down when it's time to change case sizes. The Quick Change Jaws LS-Large assembly fixes that. Instead of pulling your jaws apart, hunting for springs, and remembering which way everything faces, you keep a dedicated set ready to drop in. This one covers rims measuring .531" to .625", which puts a lot of common belted magnums and larger-rimmed cases right in its wheelhouse.

The jaws work the way the Co-Ax system is known for. A case sits in the spring-loaded jaws where they contact the base of the cannelure for solid, positive extraction. Everything is self-acting, so when you place a case in the die and run the handle, the jaws close around the case head on their own. Raise the handle and they open and release the case. No shell holders to buy for every caliber, no fiddling with a separate part for each cartridge.

Why the Quick Change Jaws LS-Large Earns Its Keep

The real draw here is speed and peace of mind. Changing calibers on a standard Co-Ax jaw setup means turning the jaws 180 degrees or switching between S and LS, and that's where springs get lost and wear plates end up backwards. With a complete pre-built assembly, you swap out one side of the jaws by removing a pair of 10-24 x 5/8" button head screws and dropping the new set in. The design is built so you can't put the wear plate on backwards or flip a jaw the wrong way.

Setting Up Your Co-Ax With the LS-Large Jaws

Installation is about as simple as reloading accessories get. Pull the two button head screws, set the Quick Change Jaw assembly in place, snug it down, and you're ready for the next case and die. Keeping a couple of these on the bench in different rim sizes means you spend your time loading instead of wrenching, which is exactly what most handloaders are after.

Key Specifications

  • Model: LS-Large
  • Rim Diameter Range: .531" to .625"
  • Compatibility: Forster Co-Ax Reloading Press
  • Mounting Hardware: 10-24 x 5/8" Button Head Screws
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 028271-203
  • UPC: 757253991394
  • Item Length: 3.000 in
  • Shipping Weight: 0.275 lb
  • Country of Origin: USA

What’s Included

  • Forster Quick Change Jaw Assembly LS-Large (one side of jaws, complete)
  • Mounting screws

Frequently Asked Questions

What press do the Forster Quick Change Jaws LS-Large work with?

They're made specifically for the Forster Co-Ax reloading press. The assembly replaces one side of the S or LS shell holder jaws, so you need a Co-Ax to use them. They won't adapt to other brands of presses.

What case rim sizes does the LS-Large assembly cover?

This LS-Large set holds rim diameters from .531" to .625". That range covers a lot of belted magnums and larger-rimmed cases. If your brass measures outside that spread, Forster offers other sizes like S-Large, S-Small, and LS-Small to fill the gaps.

How hard is it to install the Quick Change Jaws?

It's quick. You remove the two 10-24 x 5/8" button head screws holding your current jaw, set the new assembly in place, and screw it back down. There's no need to disassemble the shell holder jaws or deal with loose springs, and the design keeps you from mounting the wear plate backwards.

Do I still need separate shell holders for each caliber?

No, and that's the beauty of the Co-Ax system. The spring-loaded jaws grip the base of the case at the cannelure and handle a wide range of cases without caliber-specific shell holders. Keeping a few Quick Change assemblies on hand just lets you jump between rim-size groups faster.

Additional information

UPC

757253991394

Manufacturer

Manufacturer Part Number

028271-203

Shipping Weight

0.275

Reviews

There are no reviews yet.

Be the first to review “Forster Quick Change Jaws LS-Large (.531-.625) for Co-Ax Press”