0
0

Forster Ultra Micrometer Seater Die – 6.5 PRC (U00058)

UPC: 757253991356

$118.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Ultra Micrometer Seater Die for 6.5 PRC is built for handloaders who care about consistency and want to squeeze every bit of accuracy out of their rounds. It takes everything that made Forster's Bench Rest seater a staple on the reloading bench and adds a precise micrometer head up top, so you can dial seating depth with confidence instead of guesswork. Each die is machined from quality steel to tight tolerances and hand polished before and after heat treating, which is a big part of why these dies have such a loyal following among precision reloaders.

How the Ultra Micrometer Seater Handles Your 6.5 PRC

The heart of this die is a spring-loaded sliding chamber sleeve that fully captures the case before the bullet ever starts moving. That means the bullet and case stay in perfect alignment during the press-fit seating stroke, which translates to low runout and straight, concentric ammo. It's a non-crimping design, so it focuses purely on clean, aligned seating. The die works nicely with poly-tipped and VLD-style bullets, which matters for the long, high-BC projectiles folks tend to run in the 6.5 PRC.

Dialing Seating Depth With the Forster Micrometer Head

The micrometer head is where this die earns its keep. Index marks are laid out in .001 inch increments, and you can fine-tune in either direction down to roughly .0005 inches. The bright white markings are easy to read and easy to record, so when you switch between bullets or come back to a proven load, you just dial back to your noted setting and keep going. This takes most of the trial and error out of chasing the lands and getting your cartridge overall length exactly where you want it.

Forster builds these dies in the U.S.A. and offers them across a huge range of cartridges, so if you already run Forster gear the fit and feel will be right at home. Pair it with a Forster full length sizing die for 6.5 PRC and you've got a tidy, precise loading setup.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00058
  • UPC: 757253991356
  • Cartridge: 6.5 PRC
  • Die Type: Ultra Micrometer Bullet Seating Die
  • Adjustment Increments: Index marks at .001 in, adjustable to .0005 in
  • Seating Style: Non-crimping, press-fit with sliding chamber sleeve
  • Alignment: Spring-loaded sliding chamber sleeve
  • Lock Ring: Forster Cross Bolt split-type lock ring
  • Bullet Compatibility: Works with poly-tipped and VLD bullets
  • Country of Origin: Made in U.S.A.
  • Shipping Weight: 0.62 lb

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • One Forster split-type lock ring
  • Storage case
  • Complete instructions

Frequently Asked Questions

How fine can I adjust seating depth with the Forster Ultra Micrometer Seater Die?

The micrometer head has index marks at .001 inch increments and lets you fine-tune in either direction down to about .0005 inches. The bright white markings make it easy to read and record your settings. That makes it simple to return to a proven load or switch between bullets without re-measuring from scratch.

Does this die crimp the case as it seats the bullet?

No, the Ultra Micrometer Seater Die is a non-crimping design. It focuses entirely on seating the bullet straight and consistent while holding the case and bullet in perfect alignment. If you want a crimp, you'd handle that as a separate step with a dedicated crimp die.

Will the Forster Ultra Micrometer Seater Die work with long, high-BC bullets for the 6.5 PRC?

Yes, it works well with poly-tipped and VLD-style bullets, which are common choices for the 6.5 PRC. The sliding chamber sleeve captures the case and keeps everything aligned during seating, which helps keep runout low on those longer projectiles. Reloaders running long Bergers and ELD-style bullets tend to favor this die for exactly that reason.

Is this a complete die set or just the seating die?

This is the seating die only, not a full set. It covers the bullet seating step of your 6.5 PRC loading process. You'll want to pair it with a sizing die, such as the Forster full length sizing die for 6.5 PRC, to complete your setup.

Additional information

UPC

757253991356

Manufacturer

Manufacturer Part Number

U00058

Shipping Weight

0.62

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die – 6.5 PRC (U00058)”