0
0

Forster Bench Rest Full Length Die Set – 300 PRC 2-Die Set

UPC: 757253991172

$115.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

For anyone loading 300 PRC who cares about concentricity and repeatable results, Forster's Bench Rest Full Length Die Set is about as proven as it gets. This two-die set pairs a full length sizing die with Forster's famous straight-line Bench Rest seater die, giving you everything needed to size the case and seat bullets with the kind of alignment that shows up on paper. Each die is machined from quality steel to tight tolerances and hand polished before and after heat treating, which is a big part of why these run so smooth on the press.

What Sets the 300 PRC Full Length Sizer Apart

The full length sizing die works the case neck, shoulder and body, sets your headspace, deprimes, and expands the neck so the brass drops back into a SAAMI minimum chamber with minimal play. The star of the show is the elevated E-Z Out expander ball. It sits up near the die neck for better mechanical leverage on the expansion stroke, and the floating washer system corrects misalignment so the neck doesn't get pulled off center. Reloaders coming off other brands tend to notice how much smoother the stroke feels right away.

The Straight-Line Bench Rest Seater Die

Forster built the first seater die of its kind, and the design still holds up. A sliding chamber supports the entire outside diameter of the case while a close-fitting bullet channel keeps the bullet, case, and seating stem in perfect alignment before the bullet ever starts into the neck. It's a non-crimping, in-line system, and the seating stems have been refined over the years to play nicely with modern ballistic tip and VLD bullet profiles.

Both dies carry Forster's Cross Bolt locking ring, which clamps a split ring shut rather than driving a set screw into the die threads, so your settings stay put and your threads stay clean. This set is a solid foundation for bolt-action and single-shot 300 PRC rifles, whether you're a hunter chasing load consistency or a target shooter who lives and dies by concentricity.

Key Specifications

  • Cartridge: 300 PRC
  • Die Set Type: Bench Rest Full Length 2-Die Set
  • Number of Dies: 2 (Full Length Sizer and Bench Rest Seater)
  • Seater Style: Straight-line, non-crimping
  • Expander System: Elevated E-Z Out expander ball with floating washer
  • Locking Ring: Forster Cross Bolt die locking ring
  • Material: Hand-polished steel
  • Recommended Use: Bolt-action and single-shot rifles
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 004456
  • UPC: 757253991172
  • Shipping Weight: 1.65 lbs

What’s Included

  • Forster Bench Rest Full Length Sizing Die (300 PRC)
  • Forster Bench Rest Straight-Line Seater Die (300 PRC)
  • Forster die box

Frequently Asked Questions

What comes in the Forster 300 PRC Bench Rest Full Length Die Set?

You get two dies, a full length sizing die and Forster's straight-line Bench Rest seater die, packaged together in a Forster die box. The sizer handles neck, shoulder and body sizing plus depriming and neck expansion, while the seater takes care of straight bullet seating. It's everything you need to load 300 PRC start to finish, minus a press and components.

What is the E-Z Out expander ball and why does it matter?

It's Forster's elevated expander ball that sits up near the die neck instead of lower in the die body. That position gives you more mechanical leverage during the neck expansion stroke, and a floating washer system helps correct any misalignment so the case neck stays centered. The result is a smoother stroke and more concentric brass.

Will this die set work in standard reloading presses?

Yes. The Bench Rest seater adapts to most standard reloading presses, and both dies use common 7/8-14 threading that fits typical single-stage and turret presses. It's a good fit for anyone loading 300 PRC on a conventional setup.

Is the Bench Rest seater die good for VLD and ballistic tip bullets?

It is. Forster has refined its seating stems over the years to match modern ballistic tip and very low drag (VLD) bullet profiles. The close-fitting sliding chamber aligns the bullet and case before seating begins, which helps keep runout low across a range of bullet shapes.

Additional information

UPC

757253991172

Manufacturer

Manufacturer Part Number

4456

Shipping Weight

1.65

Reviews

There are no reviews yet.

Be the first to review “Forster Bench Rest Full Length Die Set – 300 PRC 2-Die Set”