0
0

Forster 6.5mm (.264) Neck Tension Gage NTG-264 Reloading Tool

UPC: 757253991134

$39.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Neck tension is one of those quiet little details that separates groups that string vertically from groups that stack. The Forster 6.5mm Neck Tension Gage gives you a fast, hands-on way to measure the inside diameter of your sized case necks so you know exactly what's happening before a bullet ever touches the brass. It's a simple tool built for a specific job, and it does that job well for anyone loading .264 diameter bullets.

The gage uses four ground steps machined to .2600", .2610", .2620", and .2630", each held to a tight tolerance of about +/- .00015" and etched right onto the metal so there's no squinting or second-guessing. You slide the stepped end into a sized neck until one of the diameters achieves a slip fit, and the reading tells you your inside neck diameter. From there you can sort brass, catch the oddball cases, and fine-tune your sizing setup for repeatable results across the whole batch.

Where the NTG-264 Earns Its Keep

This gage shines after neck sizing and before seating bullets. If you run a bushing die or an expander mandrel, it gives you real feedback on what your dies are actually doing to the brass rather than relying on published numbers and hope. It also doubles as a quick check for donuts forming at the neck-shoulder junction, which is the kind of thing that can sneak up on you after several firings and throw off seating depth and tension.

Built for the Detail-Oriented 6.5mm Reloader

If you shoot 6.5 Creedmoor, 6.5 PRC, 260 Rem, 6.5×55, or anything else that throws a .264 bullet, this is a clean, no-frills addition to the bench. It's made in the USA, backed by Forster's reputation for precision, and small enough to live right next to your sizing dies. For handloaders chasing consistency and tighter groups, having a direct read on neck tension is one of the easier upgrades you can make to your process.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: NTG-264
  • UPC: 757253991134
  • Caliber: 264 / 6.5mm (.264)
  • Function: Inspection Tool
  • Stepped Diameters: .2600", .2610", .2620", .2630"
  • Number of Steps: 4 ground steps
  • Tolerance: +/- .00015"
  • Color: Red
  • Country of Origin: United States
  • Pieces: 1
  • Weight: 0.1 lb

What’s Included

  • Forster 6.5mm (.264) Neck Tension Gage (NTG-264)

Frequently Asked Questions

How do I use the Forster 6.5mm Neck Tension Gage?

Use it after you've neck sized your brass and before you seat bullets. Insert the stepped end into the case neck and slide it in until one of the four diameters achieves a slip fit. The step that fits tells you the inside neck diameter, which you can then use to sort brass and fine-tune your sizing.

What diameters does the NTG-264 measure?

The 6.5mm gage has four ground steps at .2600", .2610", .2620", and .2630", each held to roughly +/- .00015". Those values are etched directly on the tool so you can read them at a glance. That covers the typical inside neck diameter range you'll see when loading .264 caliber bullets.

Will this work for 6.5 Creedmoor and other 6.5mm cartridges?

Yes. The gage measures inside neck diameter for any case that uses a .264 diameter bullet, including 6.5 Creedmoor, 6.5 PRC, 260 Remington, and 6.5×55. It measures the neck itself rather than being tied to a specific cartridge, so it's flexible across your 6.5mm brass.

Can the gage help catch donuts in my brass?

It can. Along with reading neck tension, the tool lets you inspect the inside diameter down toward the neck-shoulder junction to check whether a donut has started to form. Catching that early helps keep seating depth and tension consistent, especially on brass that's been fired several times.

Additional information

UPC

757253991134

Manufacturer

Manufacturer Part Number

NTG-264

Caliber/Gauge

264/6.5 mm (.264)

Shipping Weight

0.1

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5mm (.264) Neck Tension Gage NTG-264 Reloading Tool”