Description
Consistent neck tension is one of those details that separates good handloads from great ones, and the Forster Neck Tension Gage makes checking it about as painless as it gets. This is the 7mm version, cut for .284 caliber cases, and it's built to take the guesswork out of measuring the inside diameter of your sized case necks. Instead of fussing with pin gages one at a time or trying to read a caliper down in the case mouth, you drop the gage in and let the steps do the talking.
How the 7mm Neck Tension Gage Works at the Bench
The tool uses four stepped diameters that grow in size as they move toward the handle, and each step is etched right on the metal so you can read your result at a glance. On the NTG-284 those steps run .2800, .2810, .2820, and .2830 inches, held to a tight tolerance of plus or minus .00015 of an inch. You slide the stepped end into a sized neck until one diameter catches as a slip fit, and your inside neck diameter sits between the last step that passed and the one that stopped. From there you can match your bushing or mandrel to the exact neck tension you're after.
Why Reloaders Reach for the Forster NTG-284
Used after neck sizing and before seating bullets, this gage lets you screen and sort a whole batch of brass quickly so every case releases the bullet the same way. That translates to steadier chamber pressures and tighter groups downrange. It also doubles as an inspection tool for spotting a donut forming at the neck-shoulder junction, which is the kind of thing that quietly wrecks accuracy if you don't catch it. Folks who've picked it up tend to favor the graduated design over juggling individual pins, since it's faster and easier to read.
The gage is compact, made for bench use, and finished in Forster's familiar red. If you're loading for a 7mm cartridge and chasing repeatable results, it's a straightforward addition to your case prep lineup.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: NTG-284
- UPC: 757253991127
- Caliber: .284 / 7mm
- Stepped Diameters: .2800, .2810, .2820, .2830 in
- Tolerance: ±0.00015 in
- Number of Steps: 4 stepped diameters, etched
- Color: Red
- Tool Type: Inside neck diameter inspection gage
- Shipping Weight: 0.105 lb
What’s Included
- Forster NTG-284 Neck Tension Gage (7mm / .284 caliber)
Frequently Asked Questions
How do I use the Forster 7mm Neck Tension Gage?
Size your case necks first, ideally with a mandrel so the inside diameter is uniform, then slide the stepped end of the gage into the neck until one diameter gives a slip fit. Your inside neck diameter falls between the last step the neck slid over and the one that stopped it. Use that number to fine-tune your bushing or mandrel for the neck tension you want.
What diameters does the NTG-284 measure?
This 7mm gage has four stepped diameters etched on the tool: .2800, .2810, .2820, and .2830 inches. Each step is held to a tolerance of plus or minus .00015 of an inch, so you're getting a precise reading for sorting and setup.
Is this gage just for the .284 Winchester?
No. It works for any 7mm cartridge that uses .284 caliber bullets, which covers a wide range of rounds from 7mm-08 and .280 Remington to the 7mm PRC and various 7mm wildcats. As long as your case neck is sized for .284 bullets, this gage will read it.
Can the Neck Tension Gage help me catch a donut in the neck?
Yes. Because the gage reads the actual inside diameter of the neck, it will let you feel and identify a donut forming at the neck-shoulder junction. Catching that buildup early keeps it from affecting bullet seating and consistency.




Reviews
There are no reviews yet.