Description
The Forster 6.5 PRC Bushing Full Length Sizer Die Kit is built for handloaders who want more say over how their brass gets worked. Instead of a one-size-fits-all neck, this die lets you control neck tension with interchangeable bushings while it sizes the case body and bumps the shoulder back to fit a minimum-sized SAAMI chamber. The result is brass that chambers reliably and ammo that runs concentric, which is what you're after when you're chasing tight groups out of a 6.5 PRC.
The kit ships with three steel bushings measuring .288, .290, and .292 inches, hand-picked by Forster's staff to cover the neck wall thicknesses most people run. Forster offers bushings in .001 inch increments, so once you measure a loaded round at the neck and subtract roughly .002 inch, you'll know which one lands you in the sweet spot. Sizing the neck just enough to hold the bullet, and no more, is how you stretch the life out of your brass before it work-hardens on you.
What Sets the Forster 6.5 PRC Bushing Die Apart
Every die in this family comes with an etched reference line and the Forster Accu-Ring lock ring. The Accu-Ring carries reference marks that let you make repeatable .001 inch adjustments to shoulder bump, so you can break the die down, store it, and set it right back up the same way next session. That kind of repeatability matters when you're trying to keep headspace consistent across a batch.
Setting Up the 6.5 PRC Full Length Bushing Die Kit
The die includes a decapping and expander assembly, and you've got options on how you run it. Leave the expander in if your brass isn't neck-turned and you want a backstop on neck tension, or let the bushing do all the work on turned necks for maximum concentricity. Forster builds these from quality steel with a smooth interior finish on the bushings, so the whole operation feels clean and controlled on the downstroke. It's a precision tool that rewards careful setup, and it fits right into a Forster Co-Ax or any standard 7/8-14 press.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: FBK4409
- UPC: 757253990571
- Caliber: 6.5 PRC
- Die Type: Bushing Full Length Sizing Die
- Included Bushings: .288, .290, .292 inch
- Bushing Material: Steel
- Bushing Increments Available: .001 inch
- Thread Size: 7/8-14
- Lock Ring: Forster Accu-Ring with etched reference line
- Shipping Weight: 0.6 lb
What’s Included
- One Forster 6.5 PRC Bushing Full Length Sizing Die with Accu-Ring
- Three steel neck bushings (.288, .290, .292 inch)
- Decapping and expander assembly
- Instructions
Frequently Asked Questions
Which bushings come with the 6.5 PRC bushing sizer die kit?
The kit includes three steel neck bushings measuring .288, .290, and .292 inches, selected by Forster to cover the most common neck wall thicknesses. Forster also sells bushings separately in .001 inch increments if you need to fine-tune further. To pick the right one, measure a loaded round at the neck and choose a bushing roughly .002 inch smaller.
What's the difference between this and a standard full length die?
A standard full length die sizes the neck a fixed amount, while this bushing die lets you control exactly how much the neck is squeezed by swapping bushings. It still sizes the case body and bumps the shoulder back to fit a minimum-sized SAAMI chamber. The payoff is better neck tension control and longer case life since you're not overworking the brass.
Can I use this die without the expander ball?
Yes. If your brass has consistent, turned necks, you can let the bushing set your neck tension on its own and run the die without the expander for the straightest, most concentric results. If your brass isn't neck-turned, leaving the expander in helps keep neck tension even across cases.
Does the 6.5 PRC bushing die fit a standard press?
It uses the standard 7/8-14 thread, so it threads into any common single stage or turret press. It also drops straight into a Forster Co-Ax press without needing a shellholder. The included Accu-Ring lets you make repeatable .001 inch shoulder bump adjustments every time you set it up.





Reviews
There are no reviews yet.