0
0

Forster Ultra Micrometer Seater Die 7mm PRC

UPC: 757253990496

$118.99

3 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Forster's Ultra Micrometer Seater Die takes the guesswork out of loading precision 7mm PRC ammo. The heart of this die is a floating chamber sleeve that fully captures the case before the bullet ever starts moving, holding the case, bullet, and seating stem on one common axis. That tight alignment is what produces the low runout handloaders chase, and it's a big step up from dies that only support the case rim. On top of that straight-line design sits an ultra-accurate micrometer head that lets you set and record exact seating depth, so you can come back to a proven load any time.

How the 7mm PRC Ultra Micrometer Seater Die Keeps Rounds Concentric

The caliber-specific die chamber supports the full outside diameter of your sized case rather than pinching it near the neck. As the ram raises the case, the sliding sleeve rides up and keeps everything coaxial through the entire press-fit seating stroke. The bullet seating stem contacts the bullet on its ogive, which helps your overall lengths stay consistent from round to round. It's a non-crimping seater, so it focuses purely on seating depth and alignment.

Dialing In Depth With the Forster Ultra Micrometer

The micrometer head is marked in clear .001" increments with sharp white graduations that are easy to read and jot down. You can fine-tune in either direction down to roughly .0005", which makes chasing the lands on your 7mm PRC chamber a simple twist instead of trial and error. Seat a bullet close, measure it, then adjust the stem to land right where you want. With bullets running long in the 7mm PRC, the generous clearance in the die gives you room to work with heavy, high-BC projectiles.

Made in the U.S.A., these dies thread into most standard reloading presses and are a favorite among folks running precision setups, including Forster's own Co-Ax press. If you want repeatable seating depth and tight concentricity out of your 7mm PRC loads, this one earns its spot on the bench.

Key Specifications

  • Caliber: 7mm PRC
  • Die Type: Ultra Micrometer Bullet Seater (non-crimping)
  • Seating Depth Adjustment: Adjustable to approximately .0005"
  • Micrometer Graduations: .001" increments, high-contrast white markings
  • Alignment Design: Floating/sliding chamber sleeve captures full case
  • Crimp: Non-crimping
  • Press Compatibility: Adapts to most standard reloading presses
  • Country of Origin: United States
  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00094
  • UPC: 757253990496
  • Shipping Weight: 0.655 lbs

What’s Included

  • One Forster Bench Rest Ultra Micrometer Seater Die
  • One Forster split-type lock ring
  • Storage case
  • Complete instructions

Frequently Asked Questions

Does the Forster Ultra Micrometer Seater Die for 7mm PRC crimp the case?

No, this is a non-crimping style seater die. It focuses entirely on seating depth and keeping the bullet and case in alignment for concentric rounds. If you want a crimp, you'd add a separate crimp die to your process.

How fine can I adjust seating depth with this die?

The micrometer head is marked in clear .001" increments and lets you fine-tune in either direction down to about .0005". Once you find a seating depth your rifle likes, you can record the setting and return to it later without re-measuring from scratch.

Will the Forster Ultra Micrometer Seater Die work in my press?

Yes, it adapts to most standard reloading presses on the market, and it's a natural fit in Forster's own Co-Ax press. During setup you thread the die down until the bottom of the sliding chamber contacts the shell holder for a consistent, positive stop.

Why does this die produce such low runout?

Instead of only supporting the case rim, Forster's caliber-specific chamber sleeve supports the full outside diameter of the sized case. It holds the case, bullet, and seating stem on one common axis through the entire seating stroke, which is why reloaders consistently report straight, concentric rounds.

Additional information

UPC

757253990496

Manufacturer

Manufacturer Part Number

U00094

Shipping Weight

0.655

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die 7mm PRC”