0
0

Forster 308 Win Bushing Full Length Ultra Die Set with 3 Bushings

UPC: 757253990441

$230.99

4 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

This is Forster's top-tier bushing die setup for the .308 Winchester, built for folks who care about tight groups and squeezing extra life out of their brass. The set pairs the Bushing Full Length Sizing Die with the Bench Rest Ultra Micrometer Seater Die and includes three bushings, so you've got the tools to size the body, bump the shoulder, and control neck tension all in one setup.

The sizing die does the heavy lifting. It sizes the case body and bumps the shoulder back just enough to fit a minimum-spec SAAMI chamber, while the interchangeable bushing handles the neck. Because you pick the bushing, you decide exactly how much the neck gets worked, which keeps your brass from getting beat up and helps it last through more loadings. The die ships with three bushings measuring .332, .334, and .336, giving you a range to find the neck tension that your rifle and bullet combo likes best.

What Sets the Forster Bushing Sizing Die Apart

Forster includes their Accu-Ring and an etched reference line on the sizing die, which makes shoulder bump adjustments repeatable down to about .001 of an inch. If you've ever fought to get a die set back to the same spot after swapping it out, this system takes the guesswork out. Set it once, note your mark, and you're back in business every session.

Dialing In the Ultra Micrometer Seater

The Bench Rest Ultra Micrometer Seater is a non-crimping design that holds the case and bullet in alignment while the bullet is press-fit into place. That sleeve keeps everything concentric, and the micrometer head lets you tweak seating depth in fine, repeatable increments. For anyone chasing a specific jump to the lands, that kind of adjustability is a real time-saver at the bench.

This set is a natural fit for precision rifle shooters, F-Class folks, and anyone loading match ammo for a bolt gun or quality semi-auto chambered in .308. If you already run fired brass from your own rifle and want to tune neck tension and headspace rather than just cranking out rounds, this is the kind of tooling that rewards the effort.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: UFB4751
  • UPC: 757253990441
  • Caliber: 308 Winchester / 7.62 NATO
  • Set Type: 2-Die Set
  • Sizing Die: Bushing Full Length Sizing Die with Accu-Ring and etched reference line
  • Seater Die: Bench Rest Ultra Micrometer Seater Die, non-crimping
  • Included Bushings: .332, .334, .336
  • Seating Adjustment: Micrometer head adjustable to 0.0005 inch
  • Country of Origin: USA
  • Shipping Weight: 1.5 lb

What’s Included

  • One Forster Bushing Full Length Sizing Die with Accu-Ring
  • One Forster Bench Rest Ultra Micrometer Seater Die
  • Three neck bushings (.332, .334, .336)
  • Red Forster die box

Frequently Asked Questions

Which bushings come with the Forster 308 Win bushing die set?

The set ships with three bushings sized .332, .334, and .336. These cover the common neck tension range for .308 Winchester loads. To find your ideal bushing, measure the neck diameter of a loaded round and subtract a few thousandths for the amount of tension you want.

What's the difference between this bushing full length die and a standard full length die?

A standard full length die sizes the whole neck down in one fixed step, while this bushing die lets you swap in a bushing to control exactly how much the neck gets sized. That means you can set neck tension yourself and avoid overworking the brass. The body sizing and shoulder bump still happen the same way, keeping your cases fitted to a minimum-spec chamber.

Does the Ultra Micrometer seater die crimp the case?

No, the Bench Rest Ultra Micrometer Seater is a non-crimping design. It holds the case and bullet in alignment with a sleeve while the bullet is press-fit, which keeps your rounds concentric. The micrometer head lets you adjust seating depth in fine, repeatable increments down to about half a thousandth.

Will this Forster die set work for 7.62 NATO brass?

Yes, .308 Winchester and 7.62 NATO share the same case dimensions for reloading purposes, so this set handles both. Just keep in mind that military brass often has thicker walls and crimped primer pockets, so you may need to account for that in your prep. Measure your necks and pick the bushing that gives you the tension you're after.

Additional information

UPC

757253990441

Manufacturer

Manufacturer Part Number

UFB4751

Shipping Weight

1.5

Reviews

There are no reviews yet.

Be the first to review “Forster 308 Win Bushing Full Length Ultra Die Set with 3 Bushings”