0
0

Forster 6.8 Western Full Length Sizing Die (005395)

UPC: 757253990373

$57.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading 6.8 Western and want brass that drops into your chamber with a glove fit, this Forster full length sizing die earns its spot on the bench. In one stroke it sizes the case neck and body, bumps the shoulder back to set headspace, deprimes the spent primer, and expands the neck ready for the next bullet. Forster builds these from quality steel, machined by hand with one-piece reamers to keep every diameter concentric, then hand polishes them before and after heat treating for a smooth finish inside and out.

What Sets This Forster 6.8 Western Die Apart

The heart of the design is Forster's elevated E-Z Out expander ball. Instead of sitting down near the base of the case like most dies, the expander ball rides just under the neck, so it supports and expands the neck while most of the case is still captured in the die. That keeps the neck and case axis in alignment as the brass is drawn out, which cuts down on runout and sends your bullets into the rifling straight. The floating design also reduces the effort needed to pull the ball through the neck since it takes advantage of the leverage in your press linkage.

Running the 6.8 Western Sizing Die on Your Press

The die uses the standard 7/8-14 thread, so it threads into any common reloading press. It also ships with Forster's cross bolt locking ring, which clamps the split ring shut rather than driving a set screw into the threads, so your setting holds without chewing up the die body. The 6.8 Western is a sharp-shouldered, higher pressure cartridge, and a full length sizer like this is the sensible choice for returning fired brass to reliable chamber dimensions.

Why Reloaders Reach for Forster Full Length Sizers

Most folks building a 6.8 Western die collection start with the full length sizer because it handles the bulk of the work with the most flexibility. Good brass plus a Forster die usually means less fussing with setup and fewer trips of the press handle to get cases sized straight. It's a tool built to produce consistent, concentric rounds load after load.

Key Specifications

  • Cartridge: 6.8 Western
  • Die Style: Full Length Sizing Die
  • Expander System: Elevated E-Z Out floating expander ball
  • Thread: 7/8-14
  • Locking Ring: Forster Cross Bolt Die Locking Ring
  • Construction: Hand-machined with one-piece reamers, hand polished and heat treated
  • Functions: Sizes neck and body, sets shoulder for headspace, deprimes, expands neck
  • Manufacturer: Forster Products
  • Manufacturer Part Number: 005395
  • UPC: 757253990373
  • Country of Origin: Made in the U.S.A.

What’s Included

  • One Forster 6.8 Western Full Length Sizing Die
  • Decapping assembly with decapping pin and floating E-Z Out expander ball
  • Forster cross bolt die locking ring
  • Instructions
  • Die box

Frequently Asked Questions

Do I need a shellholder to use this 6.8 Western die?

If you're running it in a Forster Co-Ax press, no shellholder is required since those presses use jaws that grip the case rim. In any standard 7/8-14 threaded press, you'll need the shellholder your press maker recommends for 6.8 Western. The shellholder is not included with the die.

What does the E-Z Out expander ball do differently?

Forster positions the expander ball higher in the neck area than most dies, so it supports the neck while the case is still held in the die body. That keeps the neck and case in alignment as the brass is drawn out, which improves concentricity and reduces runout. The floating design also makes it easier to pull the ball through the neck.

Does this die resize the full case or just the neck?

This is a full length sizing die, so it works the entire case. In one stroke it sizes the neck and body, bumps the shoulder back to set headspace, deprimes the old primer, and expands the neck for the next bullet. That makes it the go-to die for returning fired 6.8 Western brass to reliable chamber dimensions.

Will the Forster 6.8 Western die fit my press?

Yes, it uses the industry standard 7/8-14 thread, so it threads into virtually any common reloading press. It also comes with the Forster cross bolt locking ring that clamps shut instead of biting into the die threads, so your setting stays put without marking up the die body.

Additional information

UPC

757253990373

Manufacturer

Manufacturer Part Number

005395

Shipping Weight

0.5

Reviews

There are no reviews yet.

Be the first to review “Forster 6.8 Western Full Length Sizing Die (005395)”