Description
Big magnums like the .338 Lapua reward handloaders who pay attention to detail, and this Forster set is built to do just that. It pairs a Bushing Full-Length Sizing Die with the Bench Rest Ultra Micrometer Seater Die, giving you real control over two of the most important parts of a precision load: neck tension and seating depth. Both dies are made to the same tight tolerances Forster is known for, and the whole thing ships in the Deluxe Die Box so your gear stays organized on the bench.
What the Forster Bushing Die Set Does Differently
The sizing die uses interchangeable neck bushings to set bullet grip, so the neck only gets worked as much as it needs to. While the bushing handles the neck, the body of the die sizes the case down just enough to fit a minimum SAAMI chamber and bumps the shoulder for proper headspace. The payoff is brass that lasts longer and ammo that behaves the same from one firing to the next, which matters a lot when you are feeding a cartridge this big and this expensive to load. The set includes three bushings in sizes 360, 362, and 364 to cover common neck tension needs right out of the box.
Dialing In Seating Depth With the Ultra Micrometer Seater
The Bench Rest Ultra Micrometer Seater is a non-crimping die that holds the bullet and case in alignment through the seating stroke, so your bullets go in straight with minimal runout. The micrometer top lets you record a setting and return to it later without guesswork, which makes load development and repeat batches a whole lot easier.
Press Notes for the .338 Lapua Die Set
These dies are sized for the full-length .338 Lapua Magnum case, so you will want a press with the frame and leverage to handle a cartridge this large. The lock rings are designed to work optimally with the Forster Co-Ax press, and shell holders are not required when running them in a Co-Ax. In any other press, use the shell holder recommended by that press maker. Made in the USA.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UFB4901
- UPC: 757253989971
- Cartridge: .338 Lapua Magnum
- Die Style: Bushing Full Length Ultra Die Set
- Dies Included: Bushing Full-Length Sizing Die + Bench Rest Ultra Micrometer Seater Die
- Bushings Included: 3 (sizes 360, 362, 364)
- Seater Type: Non-crimping micrometer seater
- Packaging: Deluxe Die Box
- Country of Origin: Made in USA
- Shipping Weight: 1.55 lbs
What’s Included
- Bushing Full-Length Sizing Die
- Bench Rest Ultra Micrometer Seater Die
- 3 interchangeable neck bushings (360, 362, 364)
- Deluxe Die Box
Frequently Asked Questions
What comes in the Forster .338 Lapua Bushing Full Length Die Set?
You get two dies: the Bushing Full-Length Sizing Die and the Bench Rest Ultra Micrometer Seater Die. It also includes three interchangeable neck bushings in sizes 360, 362, and 364. Everything ships in the Deluxe Die Box.
How do I pick the right bushing for this die set?
The easiest method is to measure the outside neck diameter of a loaded round with a micrometer and subtract about 0.002 inches, which gives you your bushing number while allowing for brass spring-back. You can also measure neck wall thickness, double it, add the bullet diameter, and subtract 0.002 inches. The three included bushings cover common tension needs, and additional sizes are available if your brass measures differently.
Do I need shell holders to use these Forster dies?
If you run them in a Forster Co-Ax press, shell holders are not required since the Co-Ax uses its own jaw system. In any other brand of press, use the shell holder recommended by that press maker. The lock rings are also designed to work best with the Co-Ax press.
What is the advantage of a bushing die over a standard full-length die?
A bushing die lets you control exactly how much the neck is worked by swapping bushing sizes, so you only size the neck as much as needed. That reduces overworking the brass, which extends case life and helps keep neck tension consistent from one load to the next. The body of the die still sizes the case and bumps the shoulder like a traditional full-length die.




Reviews
There are no reviews yet.