Description
Forster built this 6mm BR die set for folks who take their handloads seriously and want repeatable results off the bench. The set pairs a Bushing Full Length Sizing Die with the Bench Rest Ultra Micrometer Seater Die, and it ships with three interchangeable bushings sized .264, .266, and .268. That spread lets you fine-tune neck tension to match your brass thickness and your load, instead of settling for whatever a standard sizing die hands you.
What the Forster Bushing Full Length Sizing Die Does
The sizing die works the body of the case and bumps the shoulder to set headspace, all while the bushing handles the neck. Because the bushing only sizes the neck down as much as you decide, you avoid overworking the brass, which keeps necks straighter and stretches case life. Swap bushings to tweak tension, and you can run partial or full neck sizing depending on how you set the die. Brass sized this way fits snugly in a minimum-spec chamber, which is a big part of why these loads tend to group so well.
Why the Ultra Micrometer Seater Die Earns Its Keep
The Ultra Micrometer seater is where a lot of the magic happens. It uses a sliding chamber sleeve that captures the whole case and holds it in line with the bullet during press-fit seating, so you get excellent concentricity and no runout surprises. The micrometer head adjusts in clean .001 inch increments and is easily fine-tuned to .0005 inch, with bright white markings that are quick to read and write down. Once you find the seating depth your rifle likes, you can return to it in seconds. It's a non-crimping design, which is exactly what you want for precision work with 6mm BR.
Fit and Setup for Your Forster 6mm BR Die Set
The dies adapt to most standard reloading presses. If you're running them in a Forster Co-Ax, you won't need shellholders. In any other press, just use the shellholders your press maker recommends. Everything comes packed in a Deluxe Die Box so your dies and spare bushings stay organized on the bench.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: UFB4279
- UPC: 757253989940
- Cartridge: 6mm BR
- Die Style: Bushing Full Length Die Set
- Seater Type: Bench Rest Ultra Micrometer, non-crimping
- Micrometer Adjustment: .001 inch gradations, adjustable to .0005 inch
- Bushings Included: .264, .266, .268
- Bushing Compatibility: Forster bushings
- Press Compatibility: Most standard reloading presses
- Packaging: Deluxe Die Box
- Country of Origin: USA
- Shipping Weight: 1.55 lbs
What’s Included
- Bushing Full Length Sizing Die
- Bench Rest Ultra Micrometer Seater Die
- Three bushings (.264, .266, .268)
- Deluxe Die Box
- Instructions
Frequently Asked Questions
What bushings come with the Forster 6mm BR die set?
The set includes three interchangeable bushings sized .264, .266, and .268. That range lets you fine-tune neck tension to match your brass and your specific load. If you need a different size down the road, Forster bushings drop right in.
Does this die set bump the shoulder, or only size the neck?
The Bushing Full Length Sizing Die sizes the case body and bumps the shoulder to set your headspace while the bushing handles the neck separately. Because the bushing only sizes the neck as far as you set it, you control tension without overworking the brass. That combination is what keeps necks straight and extends case life.
What makes the Ultra Micrometer Seater Die worth it?
The Ultra seater uses a sliding chamber sleeve that holds the case and bullet in alignment during seating, which keeps runout low. The micrometer head adjusts in .001 inch increments and fine-tunes to .0005 inch, so once you find your rifle's sweet spot you can repeat it instantly. It's a non-crimping design built for precision loads.
Will these dies work in my press, and do I need a shellholder?
The dies adapt to most standard reloading presses. If you run a Forster Co-Ax press, no shellholder is needed. In any other press, use the shellholder recommended by your press manufacturer.



Reviews
There are no reviews yet.