Description
The Forster Bushing Full Length Sizing Die for .300 PRC is built for folks who want real control over their brass. Instead of a fixed neck diameter like a standard full length die, this one uses interchangeable bushings so you set the exact neck tension your load likes. On a single pull of the press it sizes the case body, bumps the shoulder back to establish headspace, deprimes, and expands the neck. The result is ammo that chambers smoothly and stays concentric round after round.
What the Forster Bushing Full Length Die Does Differently
Because the bushing handles most of the neck sizing, your brass only gets worked as much as it needs. That means less overworking of the neck, which translates to longer case life and more consistent bullet release. The die carries Forster's elevated E-Z Out expander ball, which lets the neck pass over the ball while most of the case is still held inside the die body. That keeps necks straight and runout low, which is exactly what you're chasing when you reload a long-range cartridge like the .300 PRC.
Fitting Bushings to Your .300 PRC Brass
Bushings run in .001 inch increments, so you can tune neck tension to your specific brass and chamber. A common starting point is picking a bushing roughly .002 inch under your loaded round measured at the neck. The die also ships with the etched reference line and Accu-Ring to make repeatable adjustments easy, and the expander ball is removable if you're neck turning and want the bushing to set tension on its own.
Built the Way Forster Builds Everything
This die is machined by hand with one-piece reamers, heat treated, and hand polished for that smooth-as-silk feel reloaders talk about. It threads into any standard 7/8-14 press and works in the Forster Co-Ax as well. If you're loading precision .300 PRC and want flexibility without buying a dozen dies, this is a smart foundation to build on.
Key Specifications
- Caliber: .300 PRC
- Die Type: Bushing Full Length Sizing Die
- Functions: Sizes neck, body, and shoulder; deprimes; expands neck
- Neck Tension Control: Interchangeable bushings in .001 inch increments
- Expander: Elevated E-Z Out expander ball (removable)
- Features: Etched reference line and Accu-Ring
- Thread: 7/8-14 (fits standard presses and Forster Co-Ax)
- Construction: Hand machined with one-piece reamers, heat treated, hand polished
- Bushing Compatibility: Forster bushings only
- Country of Origin: USA
- Manufacturer: Forster Products
- Manufacturer Part Number: FBD4749
- UPC: 757253989926
What’s Included
- One Forster Bushing Full Length Sizing Die (.300 PRC)
- Decapping/expander assembly with decapping pin and E-Z Out expander ball
- Forster die body ring (Accu-Ring) for standard and Co-Ax presses
- Die box and complete instructions
Frequently Asked Questions
Does the Forster Bushing Full Length Die come with bushings?
No, this is the die only and bushings are sold separately. That lets you buy the exact sizes your brass and chamber call for rather than paying for ones you won't use. If you'd rather get a set out of the gate, Forster also offers this same die bundled as a kit with three bushings.
How do I pick the right bushing size for my .300 PRC?
Measure the neck diameter of a loaded round, then choose a bushing roughly .002 inch smaller to get solid bullet grip. Bushings come in .001 inch increments so you can fine-tune from there. If you neck turn your brass, you may want to size slightly differently and can remove the expander ball to let the bushing set tension on its own.
Will this die work with Redding or Wilson bushings?
No, the Forster bushing full length die is designed to use Forster bushings only. Bushings from other brands are a different diameter and won't seat correctly in this die. Stick with Forster bushings and you'll get the proper fit and centering.
Can I use this die in a standard reloading press?
Yes, it has 7/8-14 threads and installs in any standard reloading press. It also works in the Forster Co-Ax press, where no shellholder is needed. In other presses you'll want the shellholder recommended by your press maker.



Reviews
There are no reviews yet.