0
0

Forster 6.5x47mm Lapua Bushing Full Length Sizing Die

UPC: 757253989841

$99.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Bushing Full Length Sizing Die for 6.5x47mm Lapua is built for handloaders who want real control over their brass. In a single pass it sizes the case body, bumps the shoulder back to set headspace, and works the neck only as much as the bushing you choose allows. That combination is what makes these dies a favorite among precision and bench rest crowds shooting the 6.5×47.

The heart of the design is the interchangeable neck bushing. Rather than relying on a fixed expander to set neck diameter, you drop in a bushing sized to your loaded round and the die does the rest. A common starting point is choosing a bushing roughly .002 inch under your loaded neck measurement, and since bushings come in .001 inch steps you can fine tune neck tension for your exact brass thickness and seating feel. Do note this die does not include a bushing, so you will want to order the correct size separately.

What Sets the Forster 6.5×47 Bushing Die Apart

Forster machines these dies by hand on precise lathes to very tight tolerances, then heat treats and hand polishes the internals for a smooth finish that is easy on your cases. Because the body and shoulder are sized just enough to chamber in a minimum SAAMI rifle and the neck is barely touched, your brass lasts longer and stays more consistent round to round. The die also features an etched reference line and Accu-Ring lock ring, which lets you make repeatable adjustments in .001 inch increments when you are chasing that perfect shoulder bump.

Setting Up the Die on Your Press

The die comes with a Forster die body ring that works in a Co-Ax press as well as any standard 7/8-14 threaded press. If you are running it in something other than a Co-Ax, you will need the shellholder your press manufacturer recommends. It includes a decapping and expander assembly, and the bushing height inside the die is adjustable if you want to size the full neck or just a portion of it.

Key Specifications

  • Manufacturer: Forster Products
  • Caliber: 6.5x47mm Lapua
  • Die Type: Bushing Full Length Sizing Die
  • Function: Sizes neck, shoulder, and body with adjustable neck tension
  • Bushing: Uses interchangeable Forster neck bushings (sold separately)
  • Bushing Increments: 0.001 inch
  • Lock Ring: Accu-Ring with etched reference line
  • Press Compatibility: Forster Co-Ax and standard 7/8-14 threaded presses
  • Construction: Hand-polished, heat-treated steel
  • Country of Origin: USA
  • Manufacturer Part Number: FBD4411
  • UPC: 757253989841
  • Shipping Weight: 0.515 lb

What’s Included

  • One Forster Bushing Full Length Sizing Die (6.5x47mm Lapua)
  • Decapping and expander assembly
  • Forster die body ring with Accu-Ring
  • Instructions
  • Die box

Frequently Asked Questions

Does the Forster 6.5×47 Lapua Bushing Full Length Sizing Die come with bushings?

No, this is the die-only version, so bushings are purchased separately. Forster neck bushings come in .001 inch increments, which lets you pick the exact size for your brass and desired neck tension. If you would rather get everything together, Forster also offers a kit version that ships with three bushings.

What bushing size should I start with for 6.5×47 Lapua?

A good rule of thumb is to measure the neck of a loaded round and choose a bushing about .002 inch smaller. That typically gives you solid bullet grip while minimizing how much you work the neck. From there you can step up or down in .001 inch increments to fine tune tension for your specific brass.

Will this die work in a standard press or only a Forster Co-Ax?

It works in both. The included die body ring is designed for the Forster Co-Ax press and also threads into any standard 7/8-14 reloading press. If you are using a non-Forster press, just add the shellholder your press manufacturer recommends.

How is a bushing die different from a standard full length die?

A standard full length die uses a fixed expander ball to set neck diameter, which works the neck more than some precision shooters like. This bushing die lets you control neck tension directly by swapping bushings while still sizing the body and bumping the shoulder. The result is less overworking of the neck, which helps brass last longer and stay more concentric.

Additional information

UPC

757253989841

Manufacturer

Manufacturer Part Number

FBD4411

Shipping Weight

0.515

Reviews

There are no reviews yet.

Be the first to review “Forster 6.5x47mm Lapua Bushing Full Length Sizing Die”