0
0

Forster Ultra Micrometer Seater Die .338 Lapua Mag U00127

UPC: 757253705014

$118.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you're loading precision .338 Lapua Magnum and want every round to come out the same, this is the seater die that makes it happen. The Forster Ultra Micrometer Seater Die takes everything that made the original Bench Rest seater a favorite among serious handloaders and adds a micrometer head on top, so you can set and record your seating depth with repeatable accuracy. The micrometer adjusts in either direction and is readable to .001 inch, with enough room between the white markings to nudge things even finer when you're chasing a node.

How the Ultra Micrometer Seater Die Holds Alignment

What sets this die apart is the floating, spring-loaded chamber sleeve. As the case rides up, the sleeve captures the full outside diameter of the sized case rather than just the rim or neck, and holds the bullet, case, and seating stem on a common axis through the entire stroke. That close-fitting chamber is the reason these dies are known for consistently low runout, which translates to straighter bullets and better concentricity downrange. It's a non-crimping design, so it focuses purely on clean, co-axial seating.

Dialing In Your .338 Lapua Loads

Setup follows the classic Forster routine: run the die down until the sliding chamber is compressed against the shell holder, back it off a turn so the chamber never bottoms out, then lock the ring and use the micrometer to fine-tune your overall length. Once you've found a seating depth you like, you can record the number and return to it anytime, or back off to swap bullet profiles and dial right back. For anyone running heavy .338 projectiles like long ELD and Berger bullets, that repeatability saves a lot of trial and error at the bench.

Built in the USA

Forster has been making straight-line seater dies longer than just about anyone, and the fit and finish show it. The sleeve and stem are machined to tight tolerances, the micrometer movement is positive and smooth, and the whole thing is made in the U.S.A. It threads into standard 7/8-14 presses and works right at home in a Forster Co-Ax, where a shell holder isn't even required.

Key Specifications

  • Manufacturer: Forster Products
  • Cartridge: .338 Lapua Magnum
  • Die Type: Micrometer Bullet Seating Die
  • Crimp Style: Non-crimping
  • Micrometer Adjustment: Fine-tune to .001 inch or finer, both directions
  • Alignment Feature: Spring-loaded floating chamber sleeve
  • Thread: 7/8-14 (standard press compatible)
  • Finish: Black
  • Country of Origin: Made in USA
  • Manufacturer Part Number: U00127
  • UPC: 757253705014
  • Shipping Weight: 0.625 lb

What’s Included

  • One Forster Ultra Micrometer Seater Die
  • Split-type cross bolt lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

Does the Forster Ultra Micrometer Seater Die crimp the case?

No, this is a non-crimping seater die. It's built purely for straight-line, co-axial bullet seating, which is what gives it the low runout reloaders like. If you want a crimp on your .338 Lapua loads, you'd handle that in a separate step.

How fine can I adjust the seating depth?

The micrometer head is marked in .001 inch increments and adjusts in either direction. There's enough space between the white markings to fine-tune even closer than that when you're dialing in a load. Once you find a setting you like, you can record the number and return to it later.

Will this die work in my press?

Yes. It uses the standard 7/8-14 thread, so it fits common single-stage and turret presses. It also drops right into a Forster Co-Ax press, where you don't even need a shell holder since those presses don't require one.

What makes the Ultra seater different from a standard seating die?

The key is the floating chamber sleeve that captures the full body of the sized case and holds the case, bullet, and seating stem in alignment through the whole seating stroke. That close fit is why these dies produce such consistent concentricity. The added micrometer head then lets you set and repeat your exact seating depth without the usual trial and error.

Additional information

UPC

757253705014

Manufacturer

Manufacturer Part Number

U00127

Shipping Weight

0.625

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die .338 Lapua Mag U00127”