Description
Forster has been building precision reloading gear since 1935, and this Bench Rest two-die set for the .260 Remington carries that reputation right to your bench. You get a Full Length Sizing Die and a standard Bench Rest Seater Die, both packaged in Forster's Deluxe Die Box. These are the dies serious handloaders reach for when runout and consistency matter, and they're built to produce ammo that fits your chamber like it should.
What the .260 Remington Sizing Die Does
The full length sizer works the neck, shoulder, and body of the case, deprimes, and expands the case mouth, bringing fired brass back down to SAAMI minimum dimensions so it re-chambers cleanly. The standout feature here is Forster's exclusive E-Z Out expander ball. It sits elevated, just below the die neck, which gives you better mechanical leverage on the expansion stroke and helps keep the neck centered instead of pulling it off to one side. The dies are machined from quality steel to tight tolerances and hand polished before and after heat treating, so the sizing stroke stays smooth over the long haul.
Straight-Line Seating on the .260 Rem Bench Rest Die
The Bench Rest seater is where Forster made its name. Instead of a loose bullet floating into the case, the bullet, case, and seating stem are all held together inside a close-fitting sliding chamber for the entire seating stroke. That cradle keeps everything aligned so the bullet goes in dead straight, which is exactly what you want for low runout and tight groups. It's a non-crimping design built around accuracy and repeatability. Keep in mind this is the standard Bench Rest seater and not the micrometer model, though the seating stem can be fine tuned for consistent depth.
Lock Rings and Press Fit
Both dies use Forster's Cross Bolt Die Lock Ring, which clamps around the full circumference of the die rather than digging a set screw into the threads. That means your settings hold true and the die threads don't get chewed up. The set is geared toward bolt-action and single-shot .260 Remington rifles. If you run them in a Forster Co-Ax press you won't need a shellholder, and in any other press just grab the shellholder the manufacturer recommends.
Key Specifications
- Caliber: .260 Remington (6.5-08)
- Die Type: Bench Rest 2-Die Full Length Set
- Dies Included: Full Length Sizing Die and Bench Rest Seater Die
- Seater Style: Standard Bench Rest straight-line, non-crimping
- Expander System: E-Z Out elevated expander ball
- Lock Ring: Cross Bolt Die Lock Ring
- Material: Hand-polished, heat-treated steel
- Intended Use: Bolt-action and single-shot rifles
- Packaging: Deluxe Die Box
- Manufacturer: Forster Products
- Manufacturer Part Number: 004251
- UPC: 757253007705
- Shipping Weight: 1.3 lbs
What’s Included
- Forster Bench Rest Full Length Sizing Die (.260 Remington)
- Forster Bench Rest Seater Die (.260 Remington)
- Deluxe Die Box
Frequently Asked Questions
Does the Forster 260 Remington Bench Rest set come with a micrometer seater?
No, this set includes Forster's standard Bench Rest Seater Die, not the Ultra Micrometer version. It still delivers the same straight-line seating through the sliding die chamber, and the seating stem can be adjusted for consistent depth. If you want built-in micrometer adjustment, that's a separate Ultra seater model.
Do I need a shellholder to use these Forster dies?
It depends on your press. If you're running a Forster Co-Ax press, no shellholder is required since the Co-Ax doesn't use one. In any other brand of press, you'll want to use the shellholder the press manufacturer recommends for the .260 Remington case head, which is sold separately.
What makes the Forster full length sizing die different from others?
The big difference is the exclusive E-Z Out expander ball, which sits elevated just below the die neck for better leverage on the expansion stroke and straighter neck alignment. The die sizes the neck, shoulder, and body, deprimes, and expands the case mouth, bringing brass back to SAAMI minimum so it re-chambers with minimal play. The dies are also hand polished before and after heat treating for a smooth stroke.
Is this die set a good fit for a bolt-action 260 Remington?
Yes, Forster Bench Rest dies are designed with bolt-action and single-shot rifles in mind, which is exactly where the precision pays off. The full length sizer keeps your brass fitting the chamber round after round, and the straight-line seater helps hold runout down for tighter groups. It's a popular choice for handloaders chasing consistency in the .260 Rem.




Reviews
There are no reviews yet.