0
0

Forster Ultra Micrometer Seater Die – .300 Winchester Magnum

UPC: 757253006623

$118.99

5 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Forster Ultra Micrometer Seater Die for .300 Winchester Magnum is built for handloaders who want to set their seating depth once and come back to it every single time. It carries all the straight line seating features of Forster's original Bench Rest Seater Die, with a micrometer head added on top so you can fine-tune bullet seating depth without the usual trial and error. That matters a lot with a long range magnum like the .300 Win Mag, where consistent cartridge overall length and good bullet-to-case alignment pay off in tighter groups and more predictable velocities.

How the .300 Win Mag Ultra Seater Die Works

The heart of this die is a sliding, close-fitting chamber that captures the full outside diameter of the sized case before the bullet ever starts moving. Rather than supporting just the case neck or rim, it holds the case and bullet in near-perfect alignment through the entire seating stroke, which keeps runout low and seating smooth. It's a non-crimping design, so the bullet gets press-fit straight into the neck with nothing fighting your alignment.

Dialing In the Micrometer

The micrometer head adjusts in either direction and is readable down to .0005", with clearly etched gradations at .001" increments and bright white markings that are easy to see under bench lighting. Seat a bullet close, measure it, then dial the stem up or down to land on your exact length. Once you've found the sweet spot for your rifle, writing down the setting means you can return to it batch after batch. This is a real advantage when you're working loads out toward the lands and chasing that last bit of accuracy.

What to Know Before You Load

This is a single seating die, not a full set, so you'll pair it with a sizing die for complete .300 Win Mag loading. If you run a Forster Co-Ax press, no shellholder is needed. On any other brand of press, use the shellholder recommended by that press maker. Made in the USA, it threads into standard 7/8"-14 presses and comes with a split lock ring to hold your depth setting.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: U00100
  • UPC: 757253006623
  • Caliber: .300 Winchester Magnum
  • Die Type: Ultra Micrometer Bullet Seating Die
  • Number of Dies: 1
  • Seating Style: Non-crimping, press-fit
  • Micrometer Adjustment: Adjustable to .0005"
  • Gradation Increments: .001"
  • Thread Size: 7/8"-14
  • Die Body Material: Polished steel
  • Micrometer Head: Hard-coat anodized aluminum with white markings
  • Country of Origin: USA
  • Shipping Weight: 0.625 lbs

What’s Included

  • One Forster Ultra Micrometer Seater Die (.300 Winchester Magnum)
  • Split-type lock ring
  • Storage case
  • Instructions

Frequently Asked Questions

Does the Ultra Micrometer Seater Die crimp the bullet?

No, the .300 Win Mag version is a non-crimping seating die. It press-fits the bullet while holding the case and bullet in alignment, which is what you want for precision rifle loads. The only Forster seater in this line that applies a crimp is the 30-30 version.

Do I need a shellholder with this die?

It depends on your press. If you're running a Forster Co-Ax, no separate shellholder is required since those presses use self-adjusting jaws. On any other brand of press you'll want the shellholder recommended by that press manufacturer, and it's sold separately.

Is this a complete die set or just the seater?

This is a single seating die only. To load .300 Winchester Magnum from start to finish you'll also need a sizing die. Many reloaders pair this with Forster's full length sizing die for the caliber.

How fine can I adjust the seating depth?

The micrometer head is marked in .001" gradations and can be fine-tuned down to about .0005" in either direction. The bright white markings make it easy to read and record your setting, so you can return to the exact same depth on future loading sessions.

Additional information

UPC

757253006623

Manufacturer

Manufacturer Part Number

U00100

Shipping Weight

0.625

Reviews

There are no reviews yet.

Be the first to review “Forster Ultra Micrometer Seater Die – .300 Winchester Magnum”