Description
Checking headspace is one of those jobs you don't skip, and the Forster 257 Roberts No-Go Headspace Gauge makes it simple. This gauge works for both .257 Roberts and 7x57mm Mauser chambers, since the two cartridges share the same head and shoulder dimensions. It's the tool gunsmiths and careful handloaders reach for when finish chambering a fresh barrel or sizing up a used rifle before they trust it with live ammo.
What the Forster No-Go Gauge Actually Tells You
Headspace is the distance from the bolt face to the point in the chamber that stops the cartridge from moving forward. A No-Go gauge is cut to the maximum recommended headspace dimension. In plain terms, if your bolt closes easily on this gauge, the chamber may be running long on headspace and deserves a closer look. If the bolt won't close, you're inside the safe window. Used alongside a Go gauge, it brackets exactly where your chamber sits.
Built to Hold Its Numbers
Forster machines these gauges from A2 tool steel and holds them to tolerances within 0.00015 of an inch, which is why they give you the same repeatable reading every time you drop one in. That kind of consistency matters when you're making a safety call. The hardened steel also shrugs off the handling and wear that comes with regular bench use, so it stays accurate season after season.
Why 257 Roberts Owners Keep One Handy
The .257 Roberts has a loyal following among deer and varmint hunters, and a lot of those rifles are older or custom-built, which is exactly where a headspace check pays off. Whether you're building, buying, or just doing routine maintenance on a rifle you shoot often, this gauge gives you a clear answer without guesswork. It covers a single caliber family, so make sure you're matching it to a .257 Roberts or 7x57mm Mauser chamber.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0257N
- UPC: 757253004438
- Caliber: .257 Roberts / 7x57mm Mauser
- Gauge Type: No-Go
- Material: A2 Tool Steel
- Tolerance: Within 0.00015"
- Color: Steel
- Length: 1.8"
- Weight: 0.098 lbs
- Quantity: 1
- Country of Origin: USA
What’s Included
- One Forster 257 Roberts No-Go Headspace Gauge (HG0257N)
Frequently Asked Questions
What does the 257 Roberts No-Go Headspace Gauge tell me?
A No-Go gauge is cut to the maximum recommended headspace dimension for the cartridge. If your bolt closes on this gauge, the chamber may have excessive headspace and should be checked further. If the bolt won't close on it, your chamber is within the safe range.
Will this gauge work for 7x57mm Mauser as well as 257 Roberts?
Yes. The .257 Roberts is based on the 7x57mm Mauser case, so they share the same head and shoulder dimensions. This single gauge covers both chambers.
Do I need a Go gauge too, or is the No-Go enough on its own?
For a complete check you'll want both. The Go gauge confirms the chamber will accept SAAMI-spec ammunition, while the No-Go confirms it isn't running long. Most gunsmiths set a chamber's headspace between the Go and No-Go dimensions.
What is the Forster No-Go gauge made from?
Forster machines these gauges from A2 tool steel and holds them to tolerances within 0.00015 of an inch. That combination gives you a hard, durable gauge that returns the same repeatable reading every time you use it.





Reviews
There are no reviews yet.