Description
Headspace is one of those things you don't want to guess on. This Forster GO gauge gives you a hard reference for the .257 Roberts chamber, letting you confirm the distance between the breech face and the base of the cartridge is sitting where it should. If your rifle's bolt closes on this gauge, you know the chamber will accept factory ammunition loaded to standard specifications. That's the whole point of a GO check, and it's the first step any careful gunsmith takes when finishing a barrel or sizing up a used rifle.
Since the .257 Roberts and the 7x57mm Mauser share the same headspace datum, this gauge pulls double duty across both chamberings. That makes it handy if you've got a classic Mauser in the safe alongside your Roberts. The gauge measures 1.794 inches and is built from hardened steel, so it holds its dimension through repeated use without wearing on you.
Where the Forster GO Gauge Earns Its Keep
The GO gauge sets the minimum end of the chamber range. When you're chambering a freshly reamed barrel, you ream until the bolt just closes on the GO gauge, which gives you a tight, accurate chamber that still feeds real ammo. Pair it with a NO-GO or Field gauge and you can bracket the chamber from both ends, which is the standard workflow most gunsmiths follow.
Who Reaches for the .257 Roberts GO Gauge
This is a tool for barrel builders, hobbyist gunsmiths, and reloaders who like to know exactly what their chamber is doing. Excessive headspace can be dangerous and it quietly kills accuracy, so having a known-good reference on the bench takes the mystery out of it. Forster builds these to tight manufacturing tolerances, which is why they've been a trusted name on reloading benches for decades.
Key Specifications
- Caliber: .257 Roberts (also fits 7x57mm Mauser)
- Gauge Type: GO
- Manufacturer: Forster Products
- Manufacturer Part Number: HG0257G
- UPC: 757253004421
- Material: Hardened Steel
- Color: Steel
- Length: 1.794 in
- Standard: SAAMI Dimensioned
- Quantity: 1
- Country of Origin: USA
What’s Included
- 1 Forster .257 Roberts GO headspace gauge (HG0257G)
Frequently Asked Questions
What does it mean if my rifle closes on the .257 Roberts GO gauge?
If the bolt closes on the GO gauge, your chamber is set to accept ammunition made within standard SAAMI specifications. The GO gauge represents the minimum chamber dimension, so a bolt that closes on it confirms the chamber isn't cut too short. It's the baseline check gunsmiths perform when finishing or evaluating a chamber.
Can I use this Forster GO gauge for 7x57mm Mauser too?
Yes. The .257 Roberts is derived from the 7x57mm Mauser case and the two share the same headspace datum, so this gauge works for both chamberings. That makes it a convenient single tool if you own rifles in either caliber.
Do I need a NO-GO or Field gauge along with this GO gauge?
The GO gauge sets the minimum end of the chamber range, and most gunsmiths chamber a rifle so headspace falls between the GO and NO-GO dimensions. If you're building a barrel or thoroughly inspecting a used rifle, pairing the GO with a NO-GO gauge lets you bracket the chamber from both ends. For a quick minimum check, the GO gauge alone does the job.
Why does headspace matter?
Headspace is the distance between the breech face and the base of the cartridge when the action is closed. Excessive headspace can be unsafe and will also hurt accuracy, since the case isn't properly supported at the moment of firing. Checking it with a proper gauge is the most reliable way to confirm a chamber's length.




Reviews
There are no reviews yet.