Description
Headspace is one of those things you can't eyeball, and getting it right is the difference between a rifle that shoots tight and one that gives you trouble. This Forster No-Go gage for the .22-250 Remington takes the guesswork out of it. It's machined from hardened steel to SAAMI dimensions and precision ground, so when you check your chamber against it you're getting a true reading every time. The gage measures 1.579 inches, which marks the upper end of the headspace range most gunsmiths aim for when chambering a new barrel.
How the .22-250 No-Go Gage Fits Your Bench
Think of the No-Go as the top bookend in a set of three. The Go gage sets your minimum chamber length, the No-Go marks the maximum headspace recommended for a freshly reamed chamber, and the Field gage flags the longest safe dimension. When you're setting headspace on a new bolt-action barrel, the bolt should close easily on the Go gage but not on this No-Go. That tells you the chamber is tight, accurate, and ready to run. If the bolt does close on the No-Go, it may still be inside SAAMI spec, and that's where a Field gage comes in to confirm.
Why Reloaders and Builders Reach for Forster
Forster has a long reputation for making gages you can trust, and this one carries that same care. Rimless cartridges like the .22-250 headspace off the shoulder, so the gage is cut to match that datum precisely. Whether you're installing a new barrel, checking a used rifle before a build, or just verifying things before a load development session, a known-good gage like this belongs in the drawer.
It's a single steel gage sized specifically for the .22-250 Remington, compact enough to tuck in with the rest of your gunsmithing tools and built to hold its dimensions through years of use. If you already run a Go gage, adding the No-Go gives you both ends of the window you're working within.
Key Specifications
- Cartridge: .22-250 Remington
- Gage Type: No-Go
- Gage Length: 1.579"
- Material: Hardened Steel
- Finish/Color: Steel
- Design: SAAMI Dimensioned, Rimless, Precision Ground
- Overall Length: 1.58"
- Width: 0.469"
- Height: 0.469"
- Quantity: 1
- Manufacturer: Forster Products
- Manufacturer Part Number: HG2225N
- UPC: 757253004551
What’s Included
- One Forster .22-250 Remington No-Go headspace gage (1.579")
Frequently Asked Questions
What does it mean if my bolt closes on the .22-250 No-Go gage?
If the bolt closes on the No-Go gage, your chamber has more headspace than the maximum Forster recommends for a freshly chambered barrel. That doesn't automatically mean the rifle is unsafe, since it may still fall within SAAMI spec. To know for sure, you'd follow up with a Field gage, which marks the longest safe headspace dimension.
Do I need a Go gage along with this No-Go gage?
For setting up a new barrel, yes, you'll want both. The Go gage confirms your minimum chamber length and the No-Go confirms you haven't gone too long. The bolt should close on the Go and stop short of the No-Go, which puts your chamber right in the sweet spot most gunsmiths target.
What is the exact length of this Forster .22-250 No-Go gage?
This gage is ground to 1.579 inches, which is the No-Go headspace dimension for the .22-250 Remington. It's made from hardened steel and precision ground to SAAMI specifications so you get a repeatable, accurate reading every time you use it.
Will this gage work for checking an already-assembled rifle?
The No-Go is really built for setting headspace when you're chambering a new barrel rather than passing final judgment on a finished rifle. For checking an existing or factory-installed barrel, a Field gage is the better tool since it reflects the maximum safe limit. Many builders keep the Go, No-Go, and Field gages together to cover every stage.




Reviews
There are no reviews yet.