0
0

Forster Inside/Outside Deburring Tool .17-.45 Cal (DB1000)

UPC: 757253003981

$26.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Fresh brass and freshly trimmed cases almost always leave a rough mouth behind, and that sharp edge makes seating bullets a pain while chewing up your brass over time. The Forster Inside/Outside Deburring Tool takes care of both problems with one piece of gear. It's a double-ended design: the pointed end drops into the case mouth to cut a clean inside chamfer, and the open end slips over the outside to shave off exterior burrs. One tool, both jobs, no fussing with two separate pieces on your bench.

What the Forster Deburring Tool Handles

This one covers a serious range, working with cartridge cases from .17 all the way up to .45 caliber. Whether you're loading a .223 for the varmint rig, prepping .308 match brass, or running big .45 cases, the same tool gets it done. The cutting edges are precision-ground and hardened, so they bite cleanly and hold up through load after load rather than dulling out on you.

Three Ways to Run the Forster Inside/Outside Tool

Flexibility is a big part of the appeal here. You can use it by hand for quick touch-ups or smaller batches, chuck it in a lathe when you want more speed and uniformity, or mount it to the Forster Deburring Tool Base (sold separately) with a crank handle for high-volume sessions. That last setup is a favorite among folks running lots of brass, since it keeps the chamfer consistent from case to case without wearing out your fingers.

Forster has a long-standing reputation in the reloading world for building tools that last, and this one fits right in. It's a simple, well-made piece that earns a permanent spot in the case prep drawer. Made in the USA.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number: DB1000
  • UPC: 757253003981
  • Type: Inside/Outside Case Mouth Deburring Tool
  • Caliber Range: .17 to .45
  • Design: Double-ended, multifunction
  • Cutting Edges: Precision-ground and hardened
  • Use Methods: By hand, lathe, or Deburring Tool Base (sold separately)
  • Country of Origin: United States
  • Shipping Weight: 0.1125 lbs

What’s Included

  • Forster Inside/Outside Deburring Tool (DB1000)

Frequently Asked Questions

What calibers does the Forster Inside/Outside Deburring Tool work with?

It handles all cartridge cases from .17 to .45 caliber. That covers the vast majority of popular rifle and handgun rounds, so one tool does the job across your whole lineup.

Can the Forster deburring tool be used on a lathe or does it have to be done by hand?

You've got options. It works by hand for quick jobs, chucks into a lathe for faster and more uniform results, or mounts to the Forster Deburring Tool Base for crank-handle operation during big batches. The base is sold separately.

Does it chamfer both the inside and outside of the case mouth?

Yes, that's the whole point of the double-ended design. The pointed end cuts a smooth inside chamfer to ease bullet seating, and the open end slips over the case mouth to remove exterior burrs left behind after trimming.

Do I really need to deburr after trimming cases?

If you want clean, consistent bullet seating, yes. Trimming leaves sharp corners on the case mouth that can shave bullet jackets and cause inconsistency. A quick chamfer and deburr smooths those edges out and makes your loading go a lot easier.

Additional information

UPC

757253003981

Manufacturer

Manufacturer Part Number

DB1000

Shipping Weight

0.1125

Reviews

There are no reviews yet.

Be the first to review “Forster Inside/Outside Deburring Tool .17-.45 Cal (DB1000)”