Description
Trimming .17 caliber brass is a different animal than working with standard rifle cases, and that's exactly why this shaft exists. The Forster .17 Caliber Cutter Shaft (part CT1010-CTC417) is built with a smaller pilot hole sized specifically for .172 case mouths, which the standard .490 cutter shaft simply can't accommodate. If you load .17 Hornet, .17 Remington, .17 Mach IV, .17 CCM, or any other .17 wildcat, this is the piece that makes your Original Case Trimmer do the job right.
Why the .17 Cutter Shaft Is Its Own Part
The cutter shaft does most of the heavy lifting on a Forster trimmer. The high-alloy steel shaft carries the cutting bit and holds the rotating pilots and case prep accessories, while four staggered-tooth cutting edges shear brass smoothly for perfectly square, bright, uniform case mouths. Because .17 pilots have a much smaller shank than larger calibers, they only fit the narrower pilot hole on this shaft, so you'll want this on hand before you start prepping any .172 brass.
Fitment for the Forster .17 Caliber Cutter Shaft
This shaft is made for the Original Case Trimmer (CT1010) only. It does not interchange with the Classic or Power trimmer shafts, so double-check your trimmer model before ordering. It's worth noting that if you run Forster's Neck Reamer for .172 bullets (NR1017), that tool also calls for this same .17 cutter shaft, so it pulls double duty for reloaders doing wildcat neck work.
Built to Keep Your Setup Running
The bearing surface is hand-honed for a precision fit, which keeps the shaft spinning true and your trims consistent batch after batch. Whether you're replacing a worn shaft or just adding .17 capability to a trimmer you've owned for years, this is a straightforward swap that keeps your bench ready for small-bore work. A drop of light oil on the shaft-to-bearing surface now and then keeps everything turning smooth.
Key Specifications
- Manufacturer: Forster Products
- Manufacturer Part Number: CT1010-CTC417
- UPC: 757253003967
- Caliber: .17 Caliber (.172)
- Fits: Original Case Trimmer (CT1010)
- Shaft Material: High-alloy steel
- Cutting Edges: Four staggered-tooth cutting edges
- Pilot Hole: .17 caliber pilot hole
- Bearing Fit: Hand-honed for precision
- Country of Origin: United States
- Shipping Weight: 0.2 lbs
What’s Included
- Forster .17 Caliber Cutter Shaft
- O-ring
- 8-32 x 1/8" set screw for locking pilots and case trimmer tools
Frequently Asked Questions
Will this .17 caliber cutter shaft fit my Classic or Power Case Trimmer?
No, this shaft (CT1010-CTC417) is made for the Original Case Trimmer only. The Classic and Power trimmers use their own dedicated cutter shafts. Confirm you're running the Original (CT1010) before ordering.
Why do I need a separate cutter shaft just for .17 caliber?
The .17 pilots have a smaller shank than larger calibers, so they only fit the narrower pilot hole on this shaft. The standard .490 cutter shaft that comes with the trimmer handles .204 to .459 case mouths but won't accept .17 pilots. If you're working .172 brass, this shaft is required.
What does the cutter shaft come with?
The shaft ships with an O-ring and an 8-32 x 1/8" set screw used for locking pilots and case trimmer tools in place. The high-alloy steel shaft itself features four staggered-tooth cutting edges for smooth, square trims.
Can I use this shaft with the Forster .172 neck reamer?
Yes. Forster's Neck Reamer for .172 bullet diameter (NR1017) also requires this .17 caliber cutter shaft due to its smaller shank. So if you're doing wildcat neck work on .17 brass, this shaft covers both trimming and reaming.




Reviews
There are no reviews yet.