Description
If you run a Forster Original or Power Case Trimmer and need to trim big-rim brass, the #4 collet is the piece that gets the job done. This is the CT2004, machined from steel in the Brown & Sharpe style that Forster built its reputation on. It grips the case rim with a tapered, stepped design so the head stays seated square and the case doesn't creep back while the cutter does its work. That consistency is the whole point of a good collet, since a case that shifts even slightly throws off your trim length and everything downstream from it.
Where the Collet #4 Fits In
The #4 handles the larger case heads in Forster's lineup, covering cartridges like .45-70 Government, .348 Winchester, .33 Winchester, .375 Win, .416 Rigby, .450 and .458 class rounds, and others that share those rim and base dimensions. Its step dimensions run .310" and .605", which is why it spans both some of the big straight-wall rounds and a handful of oddball calibers. If your cartridge isn't on a chart, matching the case base size to the collet steps is the way to figure out which one you need.
Matching the CT2004 to Your Trimmer
This collet is made for the Original and Power Case Trimmers only. Collets numbered 1 through 4 are not interchangeable with the 5 through 8 collets used on the Classic trimmer, so make sure you're buying for the right machine. One thing worth knowing: Original Case Trimmers built before June 1, 2010 need the collet housing opening enlarged to .610" to run the #4, while trimmers made after that date already have the modification. Forster will open the housing at the factory if yours is an older unit.
Swapping it in is quick. Back off the collet tension, drop the base of the case in, and lock it down. The steel is hand-polished for smooth operation, and like the rest of Forster's trimming gear it's made in the USA to hold up over a lot of reloading sessions.
Key Specifications
- Collet Number: #4
- Manufacturer Part Number: CT2004
- Model: CT2004
- UPC: 757253003905
- Manufacturer: Forster Products
- Compatible Trimmers: Original and Power Case Trimmer
- Step Dimensions: .310" and .605"
- Material: Heat-treated steel
- Design Style: Brown & Sharpe-style collet
- Example Cartridge Fit: .45-70 Government, .348 Win, .416 Rigby and similar large-rim cases
- Quantity: 1 collet
- Country of Origin: USA
What’s Included
- One Forster Trimmer Collet #4 (CT2004)
Frequently Asked Questions
Will the Forster Trimmer Collet #4 work with the Classic Case Trimmer?
No. The #4 collet is designed for the Original and Power Case Trimmers only. Collets numbered 1 through 4 are not interchangeable with the 5 through 8 collets used on the Classic trimmer, so if you have a Classic you'll want to look at the #8 for comparable large-rim cartridges like .45-70.
What cartridges does the Collet #4 cover?
The #4 is Forster's large case-head collet, with step dimensions of .310" and .605". It covers rounds such as .45-70 Government, .348 Winchester, .33 Winchester, .416 Rigby, and other cartridges that share those rim and base dimensions. If your cartridge isn't listed on a chart, match the case base size to the collet steps to confirm the fit.
Does my Original Case Trimmer need any modification to use the #4 collet?
It depends on the age of your trimmer. Original Case Trimmers made before June 1, 2010 need the collet housing opening enlarged to .610" to accept the #4, while units built after that date already have the modification. Forster can open the housing at the factory if you have an older trimmer.
Why use a Forster collet instead of a universal chuck head?
The internal collet steps seat the case head firmly even when rim diameters vary from case to case, which a one-size-fits-all chuck can't do as reliably. The tapered design closes on the rim without pulling the case back, so your trim length stays consistent across the whole batch. That repeatability is what makes a measurable difference once you get to seating bullets.





Reviews
There are no reviews yet.