Description
If you run a Forster Original or Power Case Trimmer and you're prepping .30 Carbine brass, the #3 collet (CT2003) is the piece that holds everything steady. The .30 Carbine carries a rim diameter right around .356", which lands squarely on the first step of this collet. That snug grip on the case head is where consistent trim length starts, and it's the reason Forster trimmers have a reputation for repeatable results.
How the #3 Collet Earns Its Keep
Forster uses a Brown & Sharpe style collet to clamp the case, and the tapered design closes down on the rim without pulling the case back as you work. The internal steps on the #3 are machined to .356", .440", and .545", so even if your brass has a little rim-to-rim variation from different headstamps, the case head stays firmly seated. That beats a one-size universal chuck or a multi-piece shell holder when you care about getting the trim depth the same across a whole batch.
Beyond Just .30 Carbine
This collet isn't a one-trick part. The #3 also covers a solid spread of popular cartridges that share a similar rim size, including 357 Magnum, 38 Special, 30-40 Krag, 10mm Auto, 7.62×39, and 6mm PPC among others. If you load more than one of those, a single collet does double duty. For any cartridge you don't see on a chart, just measure your case diameter at the rim and match it to the collet step.
Fitment You'll Want to Know
The #3 collet is built for the Forster Original and Power Case Trimmers. Collets #1 through #4 share that family, while the #5 through #8 collets belong to the Classic Case Trimmer and are not interchangeable with this one. You'll also want the correct pilot to support the case neck during trimming; for .30 Carbine and other .308" bullet calibers, that's the #30 pilot, sold separately. Made in the USA from solid steel, this is one of those small parts that quietly makes the whole setup work right.
Key Specifications
- Model: Collet #3
- Manufacturer: Forster Products
- Manufacturer Part Number: CT2003
- UPC: 757253003899
- Cartridge: .30 Carbine
- Step Dimensions: .356", .440", .545"
- Compatible Trimmers: Forster Original & Power Case Trimmer
- Collet Style: Brown & Sharpe type
- Material: Steel
- Country of Origin: USA
- Quantity: 1 collet
What’s Included
- One Forster Case Trimmer Collet #3 (CT2003)
Frequently Asked Questions
Will the Forster Collet #3 work with my trimmer?
The #3 collet is made for the Forster Original and Power Case Trimmers. Collets #1 through #4 all fit that family of trimmers. Just keep in mind the #5 through #8 collets are for the Classic Case Trimmer and won't swap over to this one.
Is the #3 the right collet for .30 Carbine?
Yes. The .30 Carbine has a rim diameter of about .356", which matches the first step of the #3 collet. Forster's own ordering guide lists the 30 M1 Carbine under the CT2003 collet.
Does this collet come with a pilot?
No, the collet and pilot are separate pieces and both are needed to trim. For .30 Carbine and other .308" bullet calibers, you'll want the #30 pilot (CT1030), which is sold on its own. The collet grips the case rim while the pilot supports the case neck.
What other cartridges does the #3 collet fit?
Quite a few. Along with .30 Carbine, the #3 handles 357 Magnum, 38 Special, 30-40 Krag, 10mm Auto, 7.62×39, 6mm PPC, and more that share a similar rim size. If your cartridge isn't on a list, measure the case at its rim and match it to the collet step dimensions.



Reviews
There are no reviews yet.