0
0

Forster Case Neck Graphiter – Dry Graphite Neck Lubricator

UPC: 757253002076

$17.99

11 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

Anyone who full-length or neck sizes fired brass knows the feel of that expander button dragging on the way back out. Residual carbon and fouling left behind from firing builds friction, and when you pull the expander through a dry, dirty neck, it can tug hard enough to stretch or distort the neck. The Forster Case Neck Graphiter solves that by cleaning and lubing the inside diameter of the neck at the same time, using a dry graphite instead of oil that could creep down and contaminate your powder charge.

The tool uses three graphite-covered brushes mounted in the base. You simply run the case neck up and down on the correct brush for your caliber, and the brush scrubs the inside clean while laying down a thin, even coat of dry graphite. That light film is exactly what you want for smooth expander pull and consistent neck tension, which in turn helps bullet seating feel uniform from case to case.

What the Case Neck Graphiter Handles

The three brushes cover everything from .22 up through .35 caliber, so a single unit works across most common rifle brass on the bench. The body is molded from tough, impact-resistant plastic, and the base comes drilled so you can bolt it down permanently to your loading bench if you'd rather keep it anchored in one spot. Prefer to keep it portable and tuck it in a drawer between sessions? That works too.

Graphite Supply and Keeping It Clean

Each Graphiter ships with enough white motor mica to process roughly 2,000 to 3,000 cases before you'll need to top it off, and Forster sells replacement motor mica packets separately when you run low. A snap-on cover is included to keep dust, grit, and bench debris out of the graphite reservoir, so the stuff coating your necks stays clean and does its job. It's a simple, no-frills piece of gear that earns its spot for anyone chasing consistency in their handloads.

Key Specifications

  • Manufacturer: Forster Products
  • Manufacturer Part Number (MPN): 011341
  • UPC: 757253002076
  • Product Type: Case Neck Cleaner and Lubricator
  • Lubricant: Dry Graphite (White Motor Mica)
  • Brushes: Three graphite-covered brushes
  • Caliber Range: .22 to .35
  • Graphite Capacity: Processes approximately 2,000 to 3,000 cases
  • Construction: Tough, impact-resistant plastic
  • Mounting: Base drilled for permanent bench mounting
  • Dimensions: 3.1 x 1.7 x 4.6 in
  • Weight: 0.15 lbs

What’s Included

  • Forster Case Neck Graphiter unit with three mounted brushes
  • White motor mica graphite (enough for approximately 2,000 to 3,000 cases)
  • Snap-on dust cover

Frequently Asked Questions

What does the Forster Case Neck Graphiter actually do?

It cleans and lubricates the inside diameter of your case necks at the same time. By running the neck up and down on the correct graphite-covered brush, it scrubs out residual fouling and leaves a thin coat of dry graphite. That reduces friction when the expander button is withdrawn, which helps prevent neck stretch and distortion.

Why use dry graphite instead of a liquid case lube on the necks?

Oils and wet lubes can migrate down into the case and contaminate the powder charge, which is something you want to avoid. The dry graphite, or motor mica, gives you the slick inside-neck surface you're after without that risk. It keeps bullet seating smooth and neck tension consistent without any messy residue to clean up.

What calibers does the Case Neck Graphiter work with?

The three mounted brushes cover everything from .22 up through .35 caliber. That spans most common rifle cartridges, so one unit handles the majority of brass on a typical reloading bench. You just pick the brush that matches your neck size.

How many cases can I process before the graphite runs out?

Each Graphiter comes with enough white motor mica to handle roughly 2,000 to 3,000 cases. When it eventually runs low, Forster offers replacement motor mica packets sold separately, so you can keep the tool topped off and in service. The included cover also helps keep the graphite clean so it lasts and performs as intended.

Additional information

UPC

757253002076

Manufacturer

Manufacturer Part Number

011341

Shipping Weight

0.15

Reviews

There are no reviews yet.

Be the first to review “Forster Case Neck Graphiter – Dry Graphite Neck Lubricator”

Related Products