Description
If you've been chasing better concentricity out of your .30-06 brass, the Forster Bench Rest Full-Length Die is the kind of tool that quietly fixes the problem. It handles the full job in one stroke: sizing the neck, shoulder, and body, bumping the shoulder to set headspace, depriming the spent primer, and expanding the neck back to spec. Because it works the whole case, your sized brass will drop into any SAAMI minimum chamber with minimal play, which makes it a solid pick if you load for more than one .30-06 rifle or just want rounds that feed without fuss.
What Makes the Forster Bench Rest Die Different
Forster machines these dies by hand using one-piece reamers, which is the real reason they hold such tight concentricity between every machined diameter. The steel is heat treated and oil quenched to a tough Rockwell hardness, then hand polished both before and after treatment for a slick interior finish. That polish matters more than it sounds. Smoother internals mean less friction on the brass, which keeps your case dimensions consistent stroke after stroke and stretches the life of your cases.
The E-Z Out Expander Ball
The standout feature here is Forster's exclusive elevated E-Z Out expander ball. Expanding the neck is where a lot of dies pull the case off-center, and this design is built specifically to keep necks concentric as the ball comes back through. For folks who have fought runout with other brands, this is the part that tends to win them over. Reloaders switching from budget dies regularly notice a real jump in concentricity.
Built for the .30-06 Springfield Reloader
This die is cut specifically for .30-06 Springfield and works with any rifle chambered for the cartridge. It's a 7/8-14 thread, so it drops right into a standard single-stage press without any special setup. Whether you're loading for hunting season or just like putting together ammo that shoots tighter than factory, this is a dependable foundation die that earns its spot on the bench.
Key Specifications
- Cartridge: .30-06 Springfield
- Die Type: Full-Length Sizing Die
- Product Line: Bench Rest
- Thread: 7/8-14
- Expander System: E-Z Out Expander Ball
- Machining: Hand machined with one-piece reamers
- Construction: Hardened, heat treated and oil quenched steel
- Finish: Hand polished before and after heat treat
- Manufacturer: Forster Products
- Manufacturer Part Number: 005611
- UPC: 757253001048
- Shipping Weight: 0.7313 lb
What’s Included
- Forster Bench Rest Full-Length Sizing Die for .30-06 Springfield
- E-Z Out expander ball assembly
- Decapping pin
Frequently Asked Questions
What does the Forster Bench Rest Full-Length Die actually do to my brass?
It sizes the case neck, shoulder, and body in a single pass, bumps the shoulder to set headspace, removes the spent primer, and expands the neck back to the correct dimension. That full-length work means your sized brass will chamber reliably in any .30-06 rifle. It's the die most reloaders start with because it covers the most ground.
Will this die fit a standard reloading press?
Yes. It uses the universal 7/8-14 thread, so it threads right into any standard single-stage press without adapters or extra parts. Setup is the same as any other full-length sizing die.
What is the E-Z Out expander ball and why does it matter?
The E-Z Out expander ball is Forster's elevated expander design built to keep case necks concentric during the neck expanding step, which is often where runout sneaks in. By positioning the ball higher in the die, it pulls through the neck more smoothly and reduces the chance of pulling the neck off center. Reloaders coming from budget dies frequently report noticeably better concentricity after switching.
Do I need a separate seating die to load complete rounds?
Yes. This is a sizing die only, so you'll still need a seating die to finish your rounds. Forster offers a matching Bench Rest seater, and the two are also sold together as a two-die set if you'd rather grab both at once.




Reviews
There are no reviews yet.