Description
Forster built its reputation on dies that produce some of the straightest, most concentric ammo you can make at home, and this two-die set for the .22-250 Rem is a perfect example of that. You get a Full Length Sizing Die and the original Bench Rest Seater Die packaged together, both machined to the same tight tolerances that have made Forster a go-to name for precision reloaders and competition crowds alike.
What the Forster .22-250 Full Length Sizer Brings to the Bench
The full length die works the whole case, sizing the neck, shoulder, and body in one stroke while the decapping pin knocks out the spent primer. What sets it apart is the high-mounted E-Z Out expander ball. By positioning the expander up near the neck rather than low in the die, Forster gives you better mechanical leverage on the expansion stroke and keeps the neck running concentric with the case body. That translates to less runout and brass that chambers cleanly in any SAAMI minimum chamber.
The Straight-Line Bench Rest Seater Die
The seater is the piece that really earns this set its name. Forster was the first to patent the sliding-chamber design, and it still holds up as one of the best in-line seaters around. A caliber-specific sliding sleeve captures the entire case before the bullet ever touches it, holding case, bullet, and seating stem in near-perfect alignment. The hand-polished seating stem has been refined over the years to play nicely with modern ballistic tip and VLD-style bullets. It's a non-crimping design, so if you want a crimp you'll add a separate die for that.
Made for .22-250 Rem Precision
This is a bolt-action and single-shot shooter's dream for squeezing the most out of the flat-shooting .22-250. Everything is cut with one-piece reamers for concentricity, heat treated for durability, and hand polished for a smooth feel on the press. The dies thread into standard 7/8-14 presses, so they'll drop right into whatever setup you're already running.
Key Specifications
- Manufacturer: Forster Products
- Caliber: .22-250 Remington
- Die Set Type: Full Length Sizer & Bench Rest Seater
- Number of Dies: 2
- Seater Style: Straight-Line Bench Rest (non-crimping)
- Sizing Die Feature: E-Z Out high-mount expander ball
- Thread: 7/8-14 (standard press fit)
- Manufacturer Part Number: 004141
- UPC: 757253000287
- Shipping Weight: 1.25 lbs
- Country of Origin: USA
What’s Included
- Forster Bench Rest Full Length Sizing Die
- Forster Bench Rest Seater Die
- Polished bullet seating stem
- Split lock rings
- Instructions
- Deluxe die box
Frequently Asked Questions
What dies come in the Forster Bench Rest Full Length Die Set for .22-250 Rem?
This set includes a Full Length Sizing Die and the standard Bench Rest Seater Die, both specific to the .22-250 Remington. They arrive packaged together in Forster's deluxe die box with lock rings and instructions. This is the standard Bench Rest seater, not the Ultra Micrometer version.
Does the Bench Rest Seater Die have a micrometer adjustment?
No, this set uses the standard Bench Rest Seater Die, which adjusts with a knurled seating stem rather than a micrometer top. It still delivers the same straight-line, sliding-chamber seating Forster is known for. If you want micrometer-based seating depth adjustment, that's Forster's separate Ultra Micrometer Seater version.
Will these dies fit my reloading press?
Yes. The dies use the standard 7/8-14 threading, so they'll thread into just about any common single-stage or turret press. A shellholder is needed for most presses but is not required if you're running a Forster Co-Ax press.
Does the seater die crimp the bullet?
No, the Forster Bench Rest Seater Die is a non-crimping design, which helps keep alignment and consistency dialed in. If you need a crimped round, you'll want to add a separate roll or taper crimp die to your process.




Reviews
There are no reviews yet.