$63.99
36 in stock
Online inventory may differ from in-store availability.
Quick turnaround so you get your gear sooner.
Trusted checkout with industry-standard protection.
Keeping Traditions Alive Since 1953
Secure Transactions provided with 
Norma has been building cartridge brass for over a century, and this .300 Win Mag unprimed brass is a good example of why their name carries weight with serious handloaders. These are fresh, new cases ready to prep, size, and load for one of the most popular .300 magnums out there. If you shoot a rifle chambered in .300 Winchester Magnum and want a case that holds up to repeated firings, this is the kind of brass you build a load recipe around.
Quality starts with the raw material. Norma uses top-grade brass drawn to narrow tolerances, which translates to uniform wall thickness and consistent case capacity from piece to piece. That consistency is what gives you tighter velocity spreads and better accuracy when you're chasing precision. The case heads are machined and flash holes are drilled rather than punched, so you're starting with a clean, concentric case out of the box.
The neck is annealed to stay softer, which helps hold the bullet securely and keeps the brass from cracking as it ages and work-hardens. Further down the body the hardness increases to resist unnecessary stretching, and the primer pocket runs noticeably harder than the neck to keep a tight, reliable fit through multiple loadings. Norma tests each production run to a minimum of ten reloading cycles, so you're getting cases designed to go the distance rather than brass you toss after a couple firings.
The .300 Winchester Magnum earned its reputation as a flat-shooting, hard-hitting round for elk, moose, and long-range work, and it rewards careful handloading. Starting with quality brass takes a big variable out of the equation. Whether you're working up a precision load for the range or building a dependable hunting round, these cases give you a dependable, repeatable platform to start from.
These are unprimed, new cases. You'll need to add your own primers, powder, and bullets to load them. They come ready for the usual prep steps before loading.
Norma engineers these cases for long life and tests each production run to a minimum of ten reloading cycles. Actual case life depends on your load pressures, resizing habits, and how well you maintain the brass. Keeping loads reasonable and annealing as needed will help you get the most out of them.
Norma starts with high-grade raw material drawn to tight tolerances for uniform wall thickness and consistent case capacity. The case heads are machined and the flash holes are drilled rather than punched, and the necks are annealed while the primer pockets are kept harder for a secure fit. That combination is what gives you repeatable accuracy and longer case life.
As with any new brass, it's smart to inspect, run through a sizing die, and check and trim to length before your first loading. Many reloaders also chamfer and deburr the case mouths and uniform the primer pockets. Starting with Norma means you're working with a clean, concentric case to begin with.
| UPC | 7393923276663 |
|---|---|
| Manufacturer | |
| Manufacturer Part Number | 20276661 |
| Shipping Weight | 1.73 |
You must be logged in to post a review.
Reviews
There are no reviews yet.