Description
Loading for the old .30-40 Krag is a labor of love, and this Lee Precision two-die set gives you the tools to do it right. It covers the two jobs that matter most for new or mixed range brass: full-length resizing to bring cases back to spec, and precise bullet seating with a micrometer top that takes the guesswork out of dialing in depth.
What the .30-40 Krag Micrometer Set Brings to the Bench
The full-length sizing die works your brass back down so it chambers cleanly across rifles, which is exactly what you want when you're running range pickups or fresh cases. Once those cases are fired in your chamber, they're fire formed and ready for consistent results. It's the practical choice for anyone building a dependable stock of Krag ammo without fussing over neck-only sizing.
Micrometer Seating That Remembers Your Load
The star of the set is the micrometer bullet seating die. The thimble is laser engraved in divisions of .001 inch and reads just like a precision depth micrometer, so you can fine-tune seating depth and jot the number down. Switch to a different bullet, then come right back to your proven load by resetting the dial. Lee built this one with a floating bullet guide that holds the case mouth and bullet in alignment for less runout, and the seating stem is machined and burnished to seat nearly any point style bullet without marking it up. The adjustment is smooth with no clicks, which makes splitting thousandths easy.
Set Up and Go
Everything you need to get rolling comes in the box, including a universal shell holder, a powder dipper, and printed instructions with starting load data. If you plan to load for hunting or your rifle's magazine keeps the bullet off the rifling, a separate Lee Factory Crimp Die is a smart add-on to firm things up, though it isn't part of this set. For a cartridge with as much history as the Krag, this is a straightforward, accurate way to keep feeding it.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92398
- UPC: 734307923983
- Caliber: .30-40 Krag
- Set Type: Full-Length 2-Die Set
- Dies Included: Full Length Sizing Die, Micrometer Bullet Seating Die
- Seating Die: Micrometer, dead length, floating bullet guide
- Micrometer Divisions: 0.001 inch, laser engraved
- Adjustment: Smooth, no clicks
- Best For: New and mixed range brass
- Shell Holder: Universal shell holder included
- Thread: 7/8-14 standard
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Printed instructions with load data
Frequently Asked Questions
What does the micrometer seating die in this .30-40 Krag set actually do for me?
It lets you set your bullet seating depth in .001 inch increments and read it straight off the laser engraved thimble, just like a depth micrometer. Once you find a seating depth your rifle likes, you record the number and can return to it exactly next time. That takes the trial and error out of swapping between loads.
Is this Lee .30-40 Krag die set good for range brass and once-fired cases?
Yes. The full-length sizing die is the right pick when you're working with new or mixed range brass because it brings cases back to full spec so they chamber reliably across rifles. After you've sized and fired them, the cases are fire formed to your chamber for consistent results going forward.
Does this set include a crimp die?
No, this is a two-die set with the full-length sizing die and the micrometer bullet seating die only. If you load for hunting or your magazine keeps the bullet off the rifling, the separate Lee Factory Crimp Die is a worthwhile add-on for a firmer crimp and more consistent ignition. It's sold separately.
Will the micrometer seating die damage soft or exposed-point bullets?
The seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging it. A floating bullet guide keeps the case mouth and bullet aligned, which also helps reduce runout for straighter, more accurate rounds.




Reviews
There are no reviews yet.