0
0

Lee Micrometer FL Die Set .222 Rem (92393) | 2-Die Reloading Set

UPC: 734307923938

$35.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee Micrometer FL Die Set for .222 Remington (92393) is built for reloaders who want factory-dimensioned ammo and the ability to fine-tune seating depth down to the thousandth. This is a two-die set that pairs a full-length sizing die with Lee's micrometer bullet seating die, so you can resize brass back to spec and dial in your seating with precision you can actually read off the thimble.

Full-length sizing is the way to go when you're loading mixed range brass or brass that was fired in another rifle, and it's a smart choice for keeping rounds chambering smoothly in bolt guns and semi-autos alike. The sizing die includes Lee's Easy X Expander, which doubles as a built-in stuck case remover. That alone saves a lot of headache if a case ever hangs up on you.

What Sets the 92393 Micrometer Seater Apart

The star of this set is the micrometer bullet seating die. The thimble and body are laser engraved with divisions representing one thousandth of an inch, so adjusting seating depth is as simple as reading a depth micrometer. No more guess-and-check rotations by feel. Inside, a floating bullet guide holds the case mouth and bullet in perfect alignment, and testing has shown this sliding guide produces cartridges with the lowest bullet runout. The seating stem is machined and burnished to seat nearly any bullet nose shape without marking or damaging the tip.

Dialing In Your .222 Rem Loads

Because the micrometer seater is a dead length design, the body contacts the shell holder to assure consistent seating depth from round to round. The bullet guide is also reversible, so you can unthread and reinstall it to seat and crimp in one operation if your load calls for it. Each die secures to your press with Lee's Ultimate Lock Ring, which uses an integral lock ring and split clamp so your settings stay put when you pull the die and reinstall it later.

If you're after repeatable, precise .222 Remington ammo without spending big on a competition seater, this Lee set delivers the kind of control serious reloaders look for.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92393
  • UPC: 734307923938
  • Cartridge: .222 Remington
  • Die Type: Micrometer Full Length 2-Die Set
  • Gun Type: Rifle
  • Sizing Style: Full-Length Resizing
  • Seating Die: Micrometer Bullet Seating Die with Floating Bullet Guide
  • Adjustment Resolution: 0.001 inch micrometer graduations
  • Lock Rings: Ultimate Lock Rings (included)
  • Thread: 7/8 x 14

What’s Included

  • Full Length Sizing Die
  • Micrometer Bullet Seating Die
  • Ultimate Lock Rings
  • Universal Shell Holder
  • Powder Dipper
  • Instructions with load data

Frequently Asked Questions

What dies come in the Lee Micrometer FL Die Set for .222 Rem?

This is a two-die set that includes a full-length sizing die and a micrometer bullet seating die. It also comes with a universal shell holder, a powder dipper, and instructions with load data. Each die ships with Lee's Ultimate Lock Rings.

What's the advantage of the micrometer seating die over a standard Lee seater?

The micrometer thimble and body are laser engraved in one thousandth of an inch divisions, so you can read and set seating depth like a depth micrometer instead of adjusting by feel. The floating bullet guide also keeps the case and bullet aligned, which testing shows produces the lowest bullet runout. For precision .222 Rem loads, that repeatability is a real benefit.

Should I choose full-length sizing or neck sizing for my .222 Remington?

Full-length sizing is the better pick when you're loading mixed range brass or brass that was fired in a different rifle, since it returns cases to factory dimensions for reliable fit and feeding. It's also the way to go if you reload for more than one .222 Rem rifle. Neck-only sizing is more suited to brass fired exclusively in your own gun.

Can this set seat and crimp at the same time?

The floating bullet guide in the micrometer seating die is reversible. By unthreading it and reinstalling it the other way, you can seat and crimp in a single operation, which is an exclusive Lee feature. For most precision loads, though, reloaders run it as a dead length seater.

Additional information

UPC

734307923938

Manufacturer

Manufacturer Part Number

92393

Reviews

There are no reviews yet.

Be the first to review “Lee Micrometer FL Die Set .222 Rem (92393) | 2-Die Reloading Set”