0
0

Lee 92378 Micrometer Full Length 2-Die Set 300 Win Mag

UPC: 734307923785

$35.99

6 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

The Lee 92378 is a two-die set built for anyone loading 300 Win Mag who wants factory-dimensioned ammo that chambers and feeds without drama. It pairs a full length sizing die with a micrometer bullet seating die, and it's one of Lee's newer designs that replaces the older Pacesetter and Ultimate lineups for this cartridge. The full length sizer works the whole case back down to spec, which makes it the right call if you're loading mixed range brass, feeding more than one rifle, or running a semi-auto that needs reliable chambering.

What the 92378 Brings to the Bench

The standout here is the seating die. The micrometer thimble is laser engraved in one-thousandth-inch increments and reads just like a precision depth mic, so you can log a setting, break the die down, and return to the exact same seating depth later. A floating bullet guide helps keep runout down and leaves a mark-free seating stem on just about any bullet nose profile. If you're chasing consistent overall length across a batch, this is the kind of tool that pays off round after round.

Sizing and Setup with the Lee 300 Win Mag Die Set

Lee machines the full length sizing die to tight tolerances and sizes to SAAMI maximum, which works your brass a little less and stretches case life compared to dies that size all the way to minimum. There's also a built-in stuck case remover designed right into the sizer, so if a case ever hangs up you can free it with simple hand tools instead of buying a separate kit. Each die wears an Ultimate Lock Ring with an integral clamp and cross bolt that locks your settings down tight.

Good to Know Before You Load

Keep in mind this is a two-die set, so it doesn't include a factory crimp die. If you're loading hunting rounds or your magazine length keeps the bullet off the rifling, a separate Lee Factory Crimp die (part 90825 for 300 Win Mag) is a worthwhile add-on. Full length sizing does require case lube, and the set threads into any standard 7/8-14 press.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92378
  • UPC: 734307923785
  • Caliber: 300 Winchester Magnum
  • Set Type: Micrometer Full Length 2-Die Set
  • Dies Included: Full Length Sizing Die and Micrometer Bullet Seating Die
  • Seating Adjustment: Laser-engraved micrometer, .001 inch increments
  • Seating Guide: Floating bullet guide for reduced runout
  • Sizing: Full length, sized to SAAMI maximum
  • Lock Rings: Ultimate Lock Rings with cross bolt clamp
  • Stuck Case Remover: Built into the sizing die
  • Press Thread: 7/8-14
  • Case Lube: Required for full length sizing

What’s Included

  • Full Length Sizing Die
  • Micrometer Bullet Seating Die
  • Universal Shell Holder
  • Powder Dipper
  • Instructions with load data

Frequently Asked Questions

What dies come in the Lee 92378 set?

This is a two-die set that includes a full length sizing die and a micrometer bullet seating die. It also ships with a universal shell holder, a powder dipper, and instructions with load data. It does not include a factory crimp die, which Lee offers separately for 300 Win Mag as part number 90825.

Is the Lee 92378 right for mixed range brass and multiple rifles?

Yes. The full length sizer brings the entire case back to spec, which is exactly what you want when loading mixed or once-fired range brass or feeding more than one rifle. It's also the preferred choice for semi-auto actions where reliable chambering matters most.

How does the micrometer seating die help my loads?

The micrometer thimble is laser engraved in one-thousandth-inch increments, so you can record a seating depth and dial right back to it after breaking the die down. A floating bullet guide helps reduce bullet runout for more consistent overall length. That repeatability makes load development and batch consistency a lot easier.

Do I need case lube with the Lee 300 Win Mag full length die set?

Yes, full length sizing requires case lubrication to size smoothly and avoid stuck cases. Apply lube sparingly and evenly before running brass through the sizer. If a case ever does stick, the sizing die has a built-in stuck case remover so you can free it with simple hand tools.

Additional information

UPC

734307923785

Manufacturer

Manufacturer Part Number

92378

Reviews

There are no reviews yet.

Be the first to review “Lee 92378 Micrometer Full Length 2-Die Set 300 Win Mag”