Description
The Lee Precision 92376 is a two-die set built for anyone loading the 7.62x39mm, whether you run an SKS, an AK pattern rifle, or a bolt gun chambered for the round. It pairs a full length sizing die with Lee's micrometer bullet seating die, and that combination is the sweet spot for semi-autos. Full length sizing brings the whole case back to spec, which matters a lot when you're feeding fired or mixed range brass that saw a chamber other than your own.
The micrometer seating die is where this set earns its keep. The laser engraved thimble reads in divisions of one thousandth of an inch, so you can set a bullet depth, write down the number, and come right back to it later without guesswork. The seating stem is machined and burnished to seat nearly any bullet nose style without marking or scuffing the tip, and a floating bullet guide keeps the case mouth and bullet in alignment for less runout and straighter rounds.
What the 92376 Micrometer Die Set Does on the Bench
The set includes the full length sizing die, the micrometer bullet seating die, a universal shell holder, a powder dipper, and printed instructions with load data to get you started. The sizing die uses Lee's Easy X Expander, which is tough enough to double as a stuck case remover if you ever get in a bind. One thing worth knowing on 7.62×39: the set ships with the .308 decapper and expander installed, and Lee builds that expander to work with both .308 and .311 diameter bullets, which covers the common mix of commercial and surplus-spec projectiles people load for this cartridge.
Getting the Most From Your 7.62×39 Loads
If you're loading for a hunting rig or a magazine-fed semi-auto where overall length is tight, a lot of folks add the Lee Factory Crimp Die to lock in consistent crimp and feeding. On its own, though, the 92376 handles sizing and precise seating like a champ, and it reflects the no-nonsense value Lee has been known for since the family started making reloading gear back in 1958.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92376
- UPC: 734307923761
- Caliber: 7.62x39mm
- Die Type: Full Length
- Dies in Set: 2
- Seating Die: Micrometer, 0.001 inch divisions
- Expander Included: .308 decapper/expander (works with .308 and .311 bullets)
- Seating Features: Floating bullet guide, dead length seating
- Shell Holder: Universal shell holder included
What’s Included
- Full length sizing die
- Micrometer bullet seating die
- Universal shell holder
- Powder dipper
- Instructions with load data
Frequently Asked Questions
What comes in the Lee 92376 7.62x39mm die set?
You get a full length sizing die, the micrometer bullet seating die, a universal shell holder, a powder dipper, and printed instructions with load data. That covers everything you need to size cases and seat bullets. Many loaders add a Lee Factory Crimp Die separately if they want a dedicated crimp step.
Does the 92376 set work with both .308 and .311 bullets?
Yes. The set ships with the .308 decapper and expander installed, and Lee designs that expander to handle both .308 and .311 diameter bullets. That's handy since 7.62×39 barrels can vary in groove diameter and loaders often run a mix of projectile sizes.
What makes the micrometer seating die better than a standard one?
The micrometer thimble is laser engraved in divisions of one thousandth of an inch, so you can record a seating depth and return to it exactly later. A floating bullet guide keeps the case and bullet aligned for less runout, and the burnished stem seats most bullet nose shapes without marking the tip.
Is full length sizing the right choice for AK and SKS rifles?
It is. Full length sizing returns the whole case to factory dimensions, which helps rounds feed and chamber reliably in semi-autos. It's also the way to go if you're loading brass that was fired in a different rifle or running mixed range pickups.



Reviews
There are no reviews yet.