Description
The Lee 92371 pairs a full-length sizing die with a micrometer bullet seating die, giving .300 AAC Blackout reloaders a straightforward path to consistent, accurate ammunition. The sizing die resizes and deprimes your brass back to proper dimensions, while the micrometer seater takes the guesswork out of setting cartridge overall length. If you've ever fought with a standard seating die by feel, this setup is a welcome change.
What the 92371 Micrometer Die Set Brings to the Bench
The standout here is the laser-engraved micrometer thimble on the seating die, marked in .001-inch increments so you can read and dial in seating depth just like a precision depth micrometer. It's infinitely adjustable with smooth, clickless movement, and a friction O-ring helps the setting stay put once you've found it. That means when you land on a load your rifle likes, you can return to the exact same seating depth batch after batch without starting from scratch.
Dialing In the Lee .300 Blackout Seater
The micrometer die uses dead length seating, where the body contacts the shell holder for uniform depth, and a floating bullet guide keeps the case mouth and bullet in alignment for less runout. The seating stem is machined and burnished to seat nearly any bullet nose shape without marking it up. The bullet guide is even reversible, letting experienced loaders seat and crimp in one operation if they want to go that route.
Why the 92371 Works for Blackout Loaders
The .300 Blackout is a caliber a lot of folks build from converted 5.56 brass, so the full-length sizing die earns its keep handling new or mixed range cases. The kit includes a universal shell holder, a powder dipper, and instructions with load data, which makes it a genuine ready-to-go option for someone getting into loading this round. Made in the USA, it carries the dependable, value-driven reputation Lee has built over decades on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92371
- UPC: 734307923716
- Caliber: .300 AAC Blackout (7.62x35mm)
- Type: Micrometer Full Length 2-Die Set
- Dies Included: Full Length Sizing Die, Micrometer Bullet Seating Die
- Micrometer Increments: .001 inch
- Seating Type: Dead length with floating bullet guide
- Ammunition Type: Rifle
- Country of Origin: United States
What’s Included
- Full Length Sizing Die
- Micrometer Bullet Seating Die
- Universal Shell Holder
- Powder Dipper
- Instructions with load data
- Die storage case
Frequently Asked Questions
What dies come in the Lee 92371 set?
The set includes a full-length sizing die and a micrometer bullet seating die. You also get a universal shell holder, a powder dipper, and instructions with load data. It's a complete two-die kit for loading .300 AAC Blackout.
What does the micrometer seating die actually do?
The micrometer head lets you set bullet seating depth in precise .001-inch increments using a laser-engraved scale that reads like a depth micrometer. This makes it easy to repeat your exact seating depth across batches once you've found a load your rifle shoots well. It takes the trial-and-error guesswork out of adjusting cartridge overall length.
Can I use this set with range brass or converted 5.56 cases?
Yes. The full-length sizing die is designed for new or mixed range brass, which is handy since a lot of .300 Blackout brass starts life as resized 5.56 cases. Just make sure your brass is trimmed to proper length before loading.
Can this set crimp as well as seat?
The micrometer seating die has a reversible floating bullet guide that allows you to seat and crimp in one operation, though that's generally recommended for more experienced loaders. For consistent results when crimping, your brass should be trimmed to uniform length and your bullets should have a crimp groove. Many loaders add a Lee Factory Crimp die as a separate step for the most reliable results.





Reviews
There are no reviews yet.