Description
If you've been chasing tighter groups out of your 6.5×55 Swedish rifle, bullet seating depth is one of the easiest places to find real gains. This Lee Precision Micrometer Bullet Seater gives you fine, repeatable control over how deep your bullets sit, and it does it with the kind of smooth adjustment that makes load development a lot less frustrating.
The heart of this die is the laser engraved micrometer thimble, which reads just like a precision depth micrometer in divisions of one thousandth of an inch. There are no clicks to count or detents to fight, just smooth, infinite adjustment so you can land right on your target seating depth. Once you find the sweet spot, lock it in and come back to it load after load without second guessing yourself.
Why the 6.5×55 Swedish Micrometer Seater Shoots Straight
Accuracy with a seating die comes down to alignment, and Lee's floating bullet guide is built to deliver it. The guide holds the case mouth and bullet in alignment with radial clearance so everything squares up with the seater screw, and Lee's testing shows this sliding guide design produces cartridges with very low bullet runout. Used as a dead length seater, the die body contacts the shell holder to assure uniform seating depth from the first round to the last.
Seating and Crimping with the Lee Micrometer Bullet Seater
The seating stem is machined and burnished to handle nearly any point style bullet without marking or damaging the nose, which matters if you're running soft points, hollow points, or match bullets for your Swede. The floating bullet guide is also reversible. Unthread it and reinstall it, and you can seat and crimp in a single operation, a feature Lee calls exclusive to their dies.
It uses the standard 7/8-14 thread, so it drops right into any common single stage or turret press. For anyone loading the venerable 6.5×55 for hunting, target work, or feeding an old military Mauser, this is a straightforward way to add precision to your bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92239
- UPC: 734307922399
- Cartridge: 6.5×55 Swedish Mauser
- Die Type: Micrometer Bullet Seating Die
- Gun Type: Rifle
- Adjustment: Laser engraved micrometer, 0.001 inch divisions
- Thread Size: 7/8-14
- Seating Style: Dead length
- Bullet Guide: Floating, reversible for seat and crimp
- Country of Origin: United States
- Shipping Weight: 0.61 lbs
What’s Included
- Lee Precision Micrometer Bullet Seater die (6.5×55 Swedish)
Frequently Asked Questions
Does this Lee micrometer seater die seat and crimp at the same time?
Yes. The floating bullet guide is reversible, so you simply unthread it and reinstall it to allow seating and crimping in one operation. Lee considers this reversible guide design exclusive to their dies. For a dedicated crimp, many reloaders still prefer a separate factory crimp die.
Will this die fit my reloading press?
It uses the standard 7/8-14 die thread, so it works in virtually any common single stage, turret, or progressive press. No special adapters are needed to run it on a typical reloading setup.
Is this a complete die set or just the seating die?
This is the standalone micrometer bullet seating die only, not a full die set. It does not include a sizing die or shell holder, so you'll want a sizing die and the correct shell holder to complete your 6.5×55 Swedish reloading process.
Will the micrometer seater mark or damage my bullets?
No. The seating stem is machined and burnished to seat nearly any point style bullet without damage or marking. That makes it a good match for soft points, hollow points, and match bullets alike.





Reviews
There are no reviews yet.