Description
Anyone chasing tighter groups out of a .270 knows that consistent seating depth is where a lot of the accuracy lives. This Lee Micrometer Precision Bullet Seater takes the guesswork out of it by giving you a laser-engraved micrometer thimble marked in thousandths of an inch, so you can repeat your favorite load setting over and over without math or shims. Adjustment is smooth with no clicks to count, and it reads just like a precision depth micrometer, which makes going from one bullet to the next quick and painless.
What the Floating Bullet Guide Does for Your .270 Loads
The standout feature here is the floating bullet guide, which holds the case mouth and bullet in alignment as the ram comes up. That radial clearance lets everything self-center against the seater screw, and Lee's own testing points to this sliding guide design producing some of the lowest bullet runout you can get from a seating die. For a flat-shooting cartridge like the .270 Winchester, that kind of concentricity translates directly to steadier results downrange.
Seating Stem and Dead Length Setup on the 92229
The seating stem is machined and burnished to handle just about any point-style bullet without scuffing or deforming the nose, so whether you're loading spitzers, hunting bullets, or long VLD-style projectiles, the contact surface plays nice. Set up as a dead length seater, the die body contacts the shell holder to lock in uniform seating depth shot after shot. The one-piece body is easy to read and easy to set, which is a nice touch when you're switching between recipes.
A Handy Trick Built Into This Micrometer Seater
The floating bullet guide is reversible. Unthread it, flip it, and reinstall it to seat and crimp in a single operation, which is an exclusive Lee design. That gives you flexibility depending on whether you want to keep the two steps separate for max precision or combine them to speed up your bench time. This die was formerly sold under product number 91417 if you're cross-referencing older catalogs.
Key Specifications
- Manufacturer: Lee Precision
- Cartridge: .270 Winchester
- Die Type: Micrometer Precision Bullet Seating Die
- Adjustment: Laser-engraved micrometer thimble, .001 inch divisions
- Adjustment Feel: Smooth, no clicks, infinitely adjustable
- Bullet Guide: Floating and reversible for seat or seat-and-crimp
- Seating Stem: Machined and burnished, mark-free on most bullet profiles
- Body: One-piece laser-engraved
- Manufacturer Part Number: 92229
- Former Part Number: 91417
- UPC: 734307922290
- Shipping Weight: 0.589 lbs
- Country of Origin: United States
What’s Included
- Lee Micrometer Precision Bullet Seater Die (.270 Winchester)
- Floating bullet guide
- Bullet seater screw
- Instructions
Frequently Asked Questions
Does the Lee Micrometer Bullet Seater work as a dead length seating die?
Yes. When set up for dead length seating, the die body contacts the shell holder to lock in consistent, uniform seating depth from round to round. That contact is what keeps your seating depth repeatable once you've found the setting you like.
Can this .270 seating die crimp as well as seat?
It can. The floating bullet guide is reversible, so you simply unthread it, flip it, and reinstall it to seat and crimp in one operation. Many reloaders keep seating and crimping as separate steps for best precision, but the option is there when you want to save time.
Will the micrometer seater mark or damage my bullet tips?
The seating stem is machined and burnished to seat nearly any point-style bullet without marking or deforming the nose. That makes it a good match for everything from standard hunting bullets to longer match-style projectiles in .270 Winchester.
How fine is the micrometer adjustment on this Lee die?
The laser-engraved thimble and body are divided in increments of one thousandth of an inch and read just like a precision depth micrometer. Adjustment is smooth with no clicks, so you can set your depth, note the reading, and return to it exactly on your next loading session.




Reviews
There are no reviews yet.