Description
Anybody who has chased consistent groups out of a .308 knows that seating depth matters, and guessing your way through it gets old fast. Lee's Micrometer Precision Bullet Seater (part number 92221) takes the guesswork out by giving you a laser-engraved micrometer thimble that reads in increments of one thousandth of an inch, so you can set and repeat your exact depth round after round. It reads just like a precision depth micrometer, and the adjustment is smooth with no clicks, which means you can split those thousandths instead of fighting detent stops.
The heart of this die is its floating bullet guide. It holds the case mouth and bullet in perfect alignment with radial clearance so everything self-centers with the seater screw, and Lee's testing shows that sliding guide design produces cartridges with the lowest bullet runout. The seating stem is machined and burnished to seat nearly any point style bullet without marking or damaging the nose, so whether you load polymer-tipped hunting bullets or match hollow points, you get clean, undamaged projectiles.
Why the 92221 Earns Its Spot on the Bench
This is a dead length seating die, which means the body contacts the shell holder for precise, uniform seating depth every time you pull the handle. That consistency is what separates handloads that print tight from ammo that wanders. If you have loaded on Lee gear before, this will drop right into your routine and tighten up your results.
Seating and Crimping From One .308 Die
Here is a handy touch that is exclusive to Lee: the floating bullet guide is reversible. Unthread it, flip it, and re-install, and you can seat and crimp in a single operation. For folks running a progressive or just wanting to cut a step out of their process, that flexibility is worth a lot. Note that this die was formerly sold under product number 91439, so if you are cross-referencing older setups, it is the same tool with the updated catalog number.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92221
- UPC: 734307922214
- Formerly Sold As: 91439
- Caliber: .308 Winchester / 7.62 NATO
- Die Type: Micrometer Precision Bullet Seating Die
- Adjustment: Micrometer, 0.001" divisions, no clicks
- Seating Style: Dead length (body contacts shell holder)
- Bullet Guide: Floating, reversible for seat and crimp
- Seating Stem: Machined and burnished, mark-free
- Body: Laser engraved one-piece
- Country of Origin: United States
- Shipping Weight: 0.579 lb
What’s Included
- Lee Micrometer Precision Bullet Seating Die (.308 Win)
- Reversible floating bullet guide
- Ultimate Lock Ring
- Instructions
Frequently Asked Questions
Can the Lee Micrometer Bullet Seater seat and crimp at the same time?
Yes. The floating bullet guide is reversible, so you simply unthread it and re-install it to seat and crimp in a single operation. That reversible guide is a feature exclusive to Lee.
How fine is the adjustment on this .308 seater die?
The micrometer thimble is laser engraved with divisions representing one thousandth of an inch, so it reads just like a precision depth micrometer. The adjustment is smooth with no clicks, which lets you split thousandths and lock in repeatable seating depth.
Will this die mark or damage my bullet tips?
No. The seating stem is machined and burnished to handle nearly any point style bullet without marking or damaging it. That makes it a good match for polymer-tipped, soft point, or match hollow point projectiles in .308 Win.
Is the Lee 92221 the same as the older 91439 die?
Yes. This die was formerly sold under product number 91439 and is now cataloged as 92221. It is the same micrometer seating tool with updated features, so it will work right alongside the rest of your .308 Lee dies.



Reviews
There are no reviews yet.