0
0

Lee Precision 92218 Micrometer Adjust Screw – Large Rifle 35 Cal+

UPC: 734307922184

$14.99

2 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you've been eyeballing seating depth with a standard Lee adjustment screw and wishing for more control, this is the upgrade that fixes it. The Lee Precision 92218 micrometer adjust screw drops right in as a direct replacement for the original adjusting screw on your Lee bullet seating die, turning a good die into a precision tool. This particular version is built for 35 caliber straight wall cartridges and larger, so match your bullet seating plug before ordering.

What the 92218 Micrometer Screw Brings to the Bench

The whole point here is repeatability. The screw is infinitely adjustable with laser-engraved divisions where each mark represents .001", one thousandth of an inch, so you can read your setting just like you would on a precision depth micrometer. Once you find a seating depth your rifle likes, write it down and come right back to it next session with zero guesswork. That kind of consistency is exactly what helps tighten up groups and keep round-to-round variation in check.

Smooth Adjustments, No Annoying Clicks

One thing handloaders appreciate about this Lee micrometer screw is the integrated friction ring. Instead of indexing clicks that fight you when you're trying to split thousandths, you get smooth, click-free movement. It makes those tiny fine-tuning adjustments feel natural, and reloaders who've run it tend to point to dead-consistent seating with little to no variation between rounds.

A Simple Upgrade You'll Want on Every Die

The micrometer adjuster isn't locked to one die for life either. It can be transferred over to your other Lee bullet seating dies whenever you need it, though plenty of folks end up grabbing one for each die so they don't have to swap back and forth. For anyone loading 35 cal or larger straight wall rounds and chasing tighter, more predictable loads, it's one of the easier improvements you can make to your setup.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92218
  • Model: Micrometer Adjust Screw
  • UPC: 734307922184
  • Type: Reloading Die Accessory
  • Caliber: 35 Cal and Larger
  • Suitable For: Large Rifle Straight Wall Cartridges
  • Adjustment Increments: .001" (one thousandth of an inch)
  • Length: 4.95 in
  • Width: 3.70 in
  • Height: 1.35 in
  • Shipping Weight: 0.13 lbs

What’s Included

  • Lee Precision 92218 Large Caliber Rifle Micrometer Adjust Screw

Frequently Asked Questions

Which cartridges does the Lee 92218 micrometer adjust screw work with?

This is the large caliber version, built for 35 caliber straight wall cartridges and larger that use the matching Lee bullet seating plug. Before ordering, compare your bullet seating plug to Lee's chart to confirm the right fit. Lee makes separate micrometer screws for handgun and for 34 caliber and smaller rifle cartridges, so matching the plug style is the key step.

Does the micrometer adjust screw replace the whole seating die?

No, it only replaces the original adjusting screw on your existing Lee bullet seating die. You keep your die and simply swap the stock screw for this micrometer version to gain fine seating depth control. It's a quick upgrade, not a full die replacement.

How precise is the adjustment on the 92218?

It's infinitely adjustable with laser-engraved divisions where each mark equals .001", one thousandth of an inch. An integrated friction ring removes the indexing clicks, giving you smooth movement so you can split thousandths cleanly. You can log your settings and return to them later just like reading a precision depth micrometer.

Can I move the micrometer screw between different dies?

Yes, the adjuster transfers easily to other compatible Lee bullet seating dies. That said, a lot of reloaders end up buying one for each die so they can leave settings dialed in and skip the back-and-forth swapping.

Additional information

UPC

734307922184

Manufacturer

Manufacturer Part Number

92218

Caliber/Gauge

35

Length

4.9500

Shipping Weight

0.13

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 92218 Micrometer Adjust Screw – Large Rifle 35 Cal+”

Related Products