Description
Casting your own bullets is one of those rabbit holes that pays off fast once you've got the right gear in front of you, and the Lee Ready To Cast Kit hands you the whole starting lineup in a single box. At the heart of it is the 110 volt Production Pot IV, a melter built for North American outlets that holds roughly 10 pounds of lead and gets up to temperature in under 20 minutes. Fill it with range scrap, pewter, or clean alloy and you're pouring bullets before you know it.
What Makes the Production Pot IV the Workhorse of This Kit
The pot is deep and the pour spout sits right up front where you can actually see what you're doing, which makes a real difference when you're trying to fill cavities cleanly. It runs on infinite heat control so you can dial in the sweet spot for your alloy, and it tops out around 900 degrees Fahrenheit. During heat-up it only pulls about 500 watts and even less once it's holding temperature, so it won't punish your electric bill on a long casting session. There's a wide, stable base for safety and about 4 inches of clearance under the spout, which is enough room to fit all brands of bullet molds and most sinker molds.
The Extras That Come With Your Ready To Cast Kit
Alongside the melter you get a Lee lead ladle sized right for scooping, stirring your alloy, and skimming dross off the top of the melt. The mold mallet is made from ash hardwood, the same wood they turn into baseball bats, and it's there to give the sprue plate a gentle tap and pop finished bullets loose without beating up your mold. Rounding it out is your choice of a free mold. Inside the box you'll find a redemption code and instructions to claim either a double-cavity bullet mold or an ingot mold, redeemable by mail or right from your phone.
Whether you're brand new to casting or finally setting up a dedicated bench, this kit gets you from cold lead to finished bullets without hunting down pieces one at a time.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92201
- UPC: 734307922016
- Furnace: Production Pot IV
- Voltage: 110 Volt (North American only)
- Lead Capacity: Approximately 10 pounds
- Melt Time: Less than 20 minutes
- Max Temperature: 900 degrees Fahrenheit
- Heat Control: Infinite adjustment
- Power Draw: 500 watts during heat-up
- Spout Clearance: 4 inches under spout
- Pour Spout: Front-mounted
- Mallet Material: Ash hardwood
- Shipping Weight: 3.96 lbs
What’s Included
- Lee Production Pot IV melter (110 Volt)
- Lee Lead Ladle
- Lee Mold Mallet (ash hardwood)
- Redemption code and instructions for your free mold (choice of double-cavity bullet mold or ingot mold)
Frequently Asked Questions
Does the Ready To Cast Kit actually come with a mold in the box?
Not a physical mold in the box itself. Inside you'll find a redemption code and instructions to claim your free mold, and you get to choose between a double-cavity bullet mold or an ingot mold. You can redeem it by mail or straight from your smartphone.
How much lead does the Production Pot IV in this kit hold?
The Production Pot IV has a deep pot that holds roughly 10 pounds of lead. It reaches casting temperature in under 20 minutes and can get up to about 900 degrees Fahrenheit, which covers the range you'll need for most bullet alloys.
Will this melter work with bullet molds from other brands?
Yes. There's about 4 inches of clearance under the front pour spout, which is enough room to fit all brands of bullet molds and most sinker molds. So you're not locked into Lee molds if you already have others on the bench.
Is the 110 volt kit right for me?
The 110 volt Production Pot IV is built for standard North American household outlets, so it plugs right into a normal wall socket. During heat-up it only draws around 500 watts and pulls even less once it's holding temperature, making it easy to run without special wiring.



Reviews
There are no reviews yet.