Description
The Lee Precision 22 ARC Factory Crimp Die is the finishing touch for anyone loading Hornady's hard-hitting little cartridge. It uses a collet with four splits that close in around the case neck as the shell holder raises, squeezing the brass into the bullet for a firm, uniform rifle-type crimp. Because the collet works from the outside in rather than relying on a cannelure, you get a repeatable crimp on bullets whether they have a crimp groove or not. For a round built to stabilize long, high-BC .224 bullets at 1:7 twist, that kind of consistency pays off downrange.
Why a Firm Crimp Matters on the 22 ARC
A solid crimp raises the pressure needed before the bullet starts to move, which helps even out the pressure curve and tighten up velocity variation between shots. That's a big deal with the 22 ARC, since it's designed to push bullets out past 1,000 yards and small ES and SD numbers keep groups honest at distance. If you're running loads through an AR-15, a firm crimp also helps keep bullets seated against the knock of the bolt stripping rounds off the magazine.
Setting Up the 22 ARC Factory Crimp Die
Setup is about as straightforward as it gets. Back the adjustment out, thread the die into the press until it touches the shell holder in the raised position, then run a loaded round up and turn the knob down until you feel it contact the case. From there a little more adjustment dials in the amount of crimp you want. Keep in mind this die crimps only and does not seat the bullet, so you'll still want your seating die to set depth first.
This is a standard 7/8-14 threaded die that fits any common single stage or turret press. One thing worth flagging up front: this die is not carbide, so a touch of case lube on the necks keeps things smooth. For reloaders chasing tight, consistent 22 ARC ammo, it's a simple tool that earns its spot on the bench.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92187
- UPC: 734307921873
- Caliber: .22 ARC
- Die Type: Factory Crimp (Collet Style)
- Crimp Style: Rifle-type collet crimp
- Thread: 7/8-14
- Material: Steel (not carbide)
- Color: Silver
- Application: Rifle
- Shipping Weight: 0.3 lb
What’s Included
- Lee Precision 22 ARC Factory Crimp Die
- Instruction sheet
Frequently Asked Questions
Do I need a crimp groove on my bullet to use the 22 ARC Factory Crimp Die?
No. The collet is strong enough to form its own crimp groove as it squeezes the case neck into the bullet. That makes it handy with the wide range of .224 match and hunting bullets reloaders run in the 22 ARC.
Does the Lee 22 ARC Factory Crimp Die seat the bullet too?
No, it only applies the crimp. You'll seat your bullet to the correct depth with your seating die first, then run the loaded round through the Factory Crimp Die as the final step.
Is this 22 ARC die carbide?
No, this die is not carbide. A light touch of case lube on the necks keeps the operation smooth and easy on your brass.
Will the 22 ARC Factory Crimp Die fit my press?
Yes. It uses the standard 7/8-14 thread, so it works in virtually any single stage, turret, or progressive press that accepts common dies.




Reviews
There are no reviews yet.