Description
If you shoot the big-bore .500 S&W Magnum or feed a 50 Beowulf, casting your own bullets is one of the smartest ways to keep that hobby fed. The Lee C501-350-RF drops a .501" diameter, 350-grain round nose flat point every pour, and it does two at a time thanks to the double cavity design. That flat point profile is a proven performer in revolvers and the Beowulf alike, giving you a solid meplat without the cost of buying commercial cast or jacketed projectiles.
What Sets the C501-350-RF Mold Apart
Lee machines these blocks out of aluminum, which is the big reason reloaders keep coming back to them. Aluminum heats up and cools down faster than iron or steel, so you'll get good bullets after just a few warm-up casts, and the lighter blocks mean less hand and wrist fatigue when you settle in for a long session at the pot. The cavities are CNC machined for tight roundness and consistent sizing, and the trochoidal venting on the mold face helps the lead fill out clean and complete.
Running the Lee .500 S&W Double Cavity Mold
Before your first pour, clean the cavities and smoke them with a wooden match or butane lighter, then put a light touch of lube on the alignment pins and sprue plate pivot to keep things moving smoothly. Keep your melt on the hotter side with a bullet this large, since the bigger cavity pulls heat quickly and a melt that's too cool will leave wrinkled, incomplete bullets. Most bullets from Lee molds can be run as-cast without sizing, so a tumble lube like Liquid Alox is often all you need before loading.
What Comes in the Box
This one ships ready to use. Unlike the six-cavity commercial molds, the double cavity blocks include both the handles and the sprue plate, so you aren't hunting down extra parts before you can start casting. Pair it with a good lead pot and some wheel weights or a proper alloy and you're set to turn out heavy .50-caliber slugs all afternoon.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92166
- UPC: 734307921668
- Model: C501-350-RF
- Caliber: .500 S&W Magnum (also suited to 50 Beowulf)
- Bullet Diameter: .501"
- Bullet Weight: 350 Grains
- Bullet Profile: Round Nose Flat Point (RNFP)
- Cavities: Double (2)
- Block Material: Aluminum
- Shipping Weight: 0.85 lbs
What’s Included
- Lee C501-350-RF double cavity mold blocks
- Mold handles
- Sprue plate
- Instructions
Frequently Asked Questions
Does the Lee C501-350-RF mold come with handles?
Yes. Lee's double cavity molds ship with both the handles and the sprue plate included, so you don't need to buy anything extra to start casting. That's different from Lee's six-cavity commercial molds, which require separate handles.
What cartridges will this mold work for?
The C501-350-RF casts a .501" diameter, 350-grain bullet that's well suited to the .500 S&W Magnum and the 50 Beowulf. The round nose flat point profile is a good all-around choice for both revolver and rifle use in those big-bore calibers.
Do I need to size the bullets from this Lee mold?
Most bullets from Lee molds can be used as-cast without sizing, which saves a step. You'll still want to lube them, and a tumble lube like Lee Liquid Alox coats the whole bullet easily. Size only if the cast diameter is too large to chamber freely.
Why does this aluminum mold matter compared to iron or steel?
Aluminum heats up and cools down faster, so you reach good bullets after just a few warm-up pours. The blocks are also about a third the weight of iron, which cuts down on fatigue during long casting sessions. With a bullet this large, just remember to keep your melt running hot for clean fill-out.




Reviews
There are no reviews yet.