Description
If you handload pistol rounds and you're tired of guessing at seating depth, the Lee Handgun Micrometer Adjust Screw is one of those small upgrades that punches way above its size. It drops in to replace the factory adjusting screw on your Lee bullet seating die and turns depth setting into a precise, repeatable process instead of trial and error with calipers after every change.
The real draw here is the resolution. The laser-engraved divisions each represent .001 inch, so you're reading seating depth the same way you'd read a quality depth micrometer. Write your number down, and next time you load that bullet and powder combo you just dial back to it. No re-zeroing, no fiddling with lock rings, no wasted rounds getting back to a known-good setting.
What Sets the Lee Micrometer Adjust Screw Apart
Most click-style adjusters make it tough to land between increments, which is exactly where a lot of accuracy loads live. This one uses an integrated friction ring that gets rid of the detent clicks entirely. You get smooth, continuous movement, so splitting thousandths is easy and the screw holds its position once you set it. That smooth feel is the difference between a part that technically works and one you actually enjoy using on the bench.
Fitting the Handgun Micrometer Adjust Screw to Your Dies
This is the handgun version, built to work with handgun cartridges that use Lee's style of bullet seating plug. It installs on any compatible Lee bullet seating die and swaps over to another die in seconds, so if you load several pistol calibers you can move it from setup to setup. Plenty of folks like it enough that they end up buying one for every die so nothing ever has to come apart. For reloaders chasing tighter, more consistent ammo without springing for a whole new die, this is an easy call.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92150
- Model: Micrometer Adjust Screw
- UPC: 734307921507
- Type: Replacement micrometer adjusting screw
- Adjustment Resolution: 0.001 inch per division
- Markings: Laser-engraved divisions
- Adjustment Feel: Integrated friction ring, no detent clicks
- Compatibility: Lee bullet seating dies using handgun-style seating plug
- Suitable For: Handgun cartridges
- Finish: Black
- Series: Adjust Screw
What’s Included
- Lee Handgun Micrometer Adjust Screw (92150)
Frequently Asked Questions
What does the Lee Handgun Micrometer Adjust Screw actually do?
It replaces the standard adjusting screw on your Lee bullet seating die with a micrometer-style unit. Each division is marked in .001 inch, so you can set a precise seating depth, record the number, and return to it later. It takes the guesswork out of dialing in bullet seating depth.
Will this fit my Lee seating die?
This is the handgun version, made to work with handgun cartridges that use Lee's style of bullet seating plug. It installs on compatible Lee bullet seating dies and can be moved from one die to another in seconds. If you load rifle or large-caliber rounds, Lee offers separate micrometer screws for those.
Why does the friction ring matter?
A lot of adjusters use click detents, which make it hard to stop between increments. The integrated friction ring on this screw removes those clicks for smooth, continuous movement. That lets you split thousandths and hold the exact setting you want.
Can I use one screw across multiple dies?
Yes. The micrometer adjuster swaps easily between compatible Lee bullet seating dies, so you can share one across several pistol calibers. That said, many reloaders pick up one for each die so they never have to break down a working setup.




Reviews
There are no reviews yet.