Description
This little adapter does something clever: it takes the Lee Carbide Factory Crimp die you may already own and turns it into a dead-length bullet seating die with micrometer adjustment. Instead of fighting with the stock adjusting screw every time you want to tweak your seating depth, you swap it out for this cartridge-specific adapter and dial in exactly where you want the bullet to sit. It's built for the .38 Special, .357 Magnum, and .41 Magnum family, so one adapter covers a nice spread of revolver loads.
The real draw here is consolidation. You get seating, crimping, and post-sizing all happening in a single station, which frees up a spot on your press for something else useful. Once the die body is set, you never have to move it again. The micrometer handles all your seating depth changes, so going from a wadcutter to a heavier semi-wadcutter is a matter of turning a dial rather than resetting the whole die.
What the Factory Crimp Micrometer Seater Adapter Brings to the Bench
Dead-length seating means the bullet gets pushed to a repeatable, consistent overall length every single pull of the handle. That consistency pays off at the target and keeps your crimp uniform across a batch. The post-sizing pass runs the finished round through a carbide ring, which smooths out any case bulge and helps everything chamber clean.
Who Gets the Most Out of This Seater Adapter
If you're running a progressive or a turret and counting stations, this is where the adapter earns its keep. Lee built it with setups like the Pro 1000, the 4-hole turret, and the Dillon 550 and 750 in mind. Loading three jobs into one station is a big deal when you only have so many holes to work with. Keep in mind the Carbide Factory Crimp die itself is sold separately, so you'll want to have that on hand or pick one up to pair with this adapter.
Key Specifications
- Manufacturer: Lee Precision
- Manufacturer Part Number: 92140
- UPC: 734307921408
- Caliber: .38 Special / .357 Magnum / .41 Magnum
- Type: Micrometer Seater Adapter
- Adjustment: Micrometer-accurate seating depth
- Function: Seating, crimping, and post-sizing in one station
- Compatibility: Lee Carbide Factory Crimp die (sold separately)
- Country of Origin: United States
- Shipping Weight: 0.151 lbs
What’s Included
- Carbide Factory Crimp Micrometer Seater Adapter (.38 Special / .357 Magnum / .41 Magnum)
- Installation instructions
Frequently Asked Questions
Do I need a Lee Carbide Factory Crimp die to use this adapter?
Yes. This is an adapter that converts an existing Lee Carbide Factory Crimp die, and the die itself is sold separately. You'll remove the stock adjusting screw from your Factory Crimp die and replace it with this cartridge-specific adapter.
Which cartridges does the 92140 seater adapter cover?
This particular adapter is set up for .38 Special, .357 Magnum, and .41 Magnum. That's a handy spread for anyone loading revolver rounds across those chamberings with a single tool.
Will this work on my progressive or turret press?
That's exactly what it was designed for. Lee had setups like the Pro 1000, the 4-hole turret, and the Dillon 550 and 750 in mind. By combining seating, crimping, and post-sizing into one station, it frees up a spot for another operation.
What does post-sizing do on this adapter?
After the bullet is seated and crimped, the finished cartridge passes through a carbide sizing ring. This irons out any case bulge from seating and helps your loaded rounds drop into the chamber without drama.





Reviews
There are no reviews yet.