0
0

Lee Precision 92006 Factory Crimp Die – 7mm PRC Rifle Reloading

UPC: 734307920067

$14.99

1 in stock

Online inventory may differ from in-store availability. 

Fast Shipping

Quick turnaround so you get your gear sooner.

Secure FFL-Friendly Checkout

Trusted checkout with industry-standard protection.

Family-Owned Business

Keeping Traditions Alive Since 1953

Secure Transactions provided with

Description

If you are loading 7mm PRC and want every round to grip the bullet the same way, the Lee Precision 92006 Factory Crimp Die earns its spot on the bench. This is the rifle-style collet crimp die, not a carbide sizer. It works by pushing a split collet inward against the case mouth, forming a clean segmented crimp that squeezes the brass into the bullet. Because the crimping force comes from the sides rather than from the top down, buckling the case is nearly impossible even if you lean on the handle a little harder than you meant to.

What the 7mm PRC Factory Crimp Die Does on the Bench

The big draw here is consistency. A firm, uniform crimp raises the pressure needed before the bullet starts to move, which smooths out the pressure curve and tightens up your velocity spread shot to shot. That matters for a long-range cartridge like the 7mm PRC, where a few feet per second of extra consistency can tighten a group at distance. One of the handier traits is that bullets do not need a cannelure or crimp groove. The collet is strong enough to form its own crimp, so you have more freedom in bullet choice.

Fitting the Lee 92006 Into Your Reloading Setup

The die uses the standard 7/8-14 thread, so it drops into any common single-stage or turret press without fuss. Crimping is its own step, done after seating, which is how a lot of careful handloaders prefer to run things anyway. Setup is straightforward: run it down to touch, then dial in your crimp with the adjusting screw, starting light and sneaking up on it. A light touch is the move with smooth-sided bullets so you do not over-squeeze them.

Made in the USA and packaged in its own storage container, this is a simple, no-nonsense tool that does one job well. Keep in mind the shell holder is not included, since most folks already have one that fits their press.

Key Specifications

  • Manufacturer: Lee Precision
  • Manufacturer Part Number: 92006
  • UPC: 734307920067
  • Caliber: 7mm PRC
  • Die Style: Factory Crimp Die (Collet)
  • Die Type: Crimp
  • Thread Size: 7/8-14
  • Dies In Set: 1
  • Carbide: No
  • Shell Holder Included: No
  • Country of Origin: USA
  • Shipping Weight: 0.295 lbs

What’s Included

  • Lee Precision 7mm PRC Factory Crimp Die
  • Plastic storage container
  • Instructions

Frequently Asked Questions

Does the 7mm PRC Factory Crimp Die work with bullets that have no crimp groove?

Yes. The collet is strong enough to form its own crimp against a smooth-sided bullet, so a cannelure is not required. Just go with a lighter crimp setting on groove-less bullets so you do not deform them.

Is the Lee 92006 a carbide sizing die?

No, this is the standard rifle-style collet Factory Crimp Die and not the carbide version. It applies a segmented crimp by squeezing the case mouth inward and does not full-length resize the case. It only affects the neck area where the crimp is formed.

Will this die fit my press?

It uses the standard 7/8-14 thread, so it threads into virtually any common single-stage, turret, or progressive press. Crimping is done as a separate step after you have seated your bullets with a seating die.

Does the Lee 7mm PRC Factory Crimp Die include a shell holder?

No, a shell holder is not included with this die. Most reloaders already own the correct shell holder for their press and caliber, but if you are new to 7mm PRC you will want to grab one separately.

Additional information

UPC

734307920067

Manufacturer

Manufacturer Part Number

92006

Caliber/Gauge

7MM PRC

Shipping Weight

0.295

Reviews

There are no reviews yet.

Be the first to review “Lee Precision 92006 Factory Crimp Die – 7mm PRC Rifle Reloading”